thefletch Posted March 4, 2005 Report Share Posted March 4, 2005 Basically I ned to find out the ERD of a koxx rim. It has to be accurate to the nearest MM. So if its on a wheel then you wont be able to measure it very accurately. In a nutshell, ERD(effective rim diameter) is the measurement between opposite spoke wholes on a rim. If possible could someone please measure this for me or tell me where i can find out quickly. I'll put a lionk up to a quicky demo of how you do this but unless you know what ur doing you probly wont be acurate enough. lol, no offense. I need this measurement for a kox rear rim, not the old school ones. 26" Quote Link to comment Share on other sites More sharing options...
Tartridge Posted March 4, 2005 Report Share Posted March 4, 2005 http://www.trials-forum.co.uk/forum/index....showtopic=35813 Quote Link to comment Share on other sites More sharing options...
thefletch Posted March 4, 2005 Author Report Share Posted March 4, 2005 (edited) Cheers for that link dude, i know how to measure but havnt got a rim to measure. people read that link Edited March 4, 2005 by thefletch Quote Link to comment Share on other sites More sharing options...
Tartridge Posted March 4, 2005 Report Share Posted March 4, 2005 Cheers for that link dude, i know how to measure but havnt got a rim to measure. ← The measurement is in that thread :blink: Quote Link to comment Share on other sites More sharing options...
thefletch Posted March 4, 2005 Author Report Share Posted March 4, 2005 Okj which is right though (yours or anal teflons)and r they actualy both the same, i aint saying either is wrong but i need to know so i can order some spokes and get my wheel bioult before koxx days. cheers dude Quote Link to comment Share on other sites More sharing options...
Tartridge Posted March 4, 2005 Report Share Posted March 4, 2005 Well, you can see the tools i used to measure it, and you can see me measuring it! Unless i have a rubber ruler, that one is bob on :blink: I think Al built his with DT spokes, which will have had 14mm nipples most likely, covering up for his spokes being a tad short. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.