mark-399 Posted July 4, 2005 Report Share Posted July 4, 2005 right i have got a t-mag (old style one ) and i am avin troble setting up the brake and chain tention if i take out a link it is to short to get te brake on and 1 more link the tentioners dont work i am usin dmr chain tugs kmc bmx chain atm i was thinkin about maybe a half link but i dont know muc bout tnem or would a set of snail cam tentioners work cears Quote Link to comment Share on other sites More sharing options...
rickycoleman Posted July 4, 2005 Report Share Posted July 4, 2005 I had the same problem, just go to your nearest bmx shop, and get some beefy bmx ones, they usually always do the job, don't bother with snail cams they are unreliable. :turned: Quote Link to comment Share on other sites More sharing options...
mark-399 Posted July 4, 2005 Author Report Share Posted July 4, 2005 i ave cain tugs but they wont work with te extra full link u pull back the tentioner as far as it will go an the cgin isnt tight enough Quote Link to comment Share on other sites More sharing options...
dave85 Posted July 4, 2005 Report Share Posted July 4, 2005 If you cant get the brake on the rim properly, then your gonna need a half link to sort the problem, or a new chain if the old one is particularly worn. Quote Link to comment Share on other sites More sharing options...
JT! Posted July 4, 2005 Report Share Posted July 4, 2005 (edited) My advice would be get a new chain, and a half link. Try fitting the new chain without the half link and see if you can get away without it. If not, use the half link. This won't cost you over £10. You can't use cams on the old t-mag. Edited July 4, 2005 by JT! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.