stock trials the real sport Posted May 1, 2006 Report Share Posted May 1, 2006 So today i bought some gear to start stripping my old frame to bare metal so i began and started to notice after following instructions on the tin that the grey primer wasn't coming of. Im sure nitromors is meant to take off everything including paint and primer, so i reckon that i haven't left it on long enough. Am i right? Any help would be appreciated. Quote Link to comment Share on other sites More sharing options...
Walleee Posted May 1, 2006 Report Share Posted May 1, 2006 (edited) Are you sure its grey primer and not silver frame? If it is still primer stick on a bit more nitromors to those areas that dont get stripped first time. Edited May 1, 2006 by jake1516 Quote Link to comment Share on other sites More sharing options...
stock trials the real sport Posted May 1, 2006 Author Report Share Posted May 1, 2006 Are you sure its grey primer and not silver frame? what do you mean by this Quote Link to comment Share on other sites More sharing options...
boris_on_trials Posted May 1, 2006 Report Share Posted May 1, 2006 (edited) Nitromorse takes off everything just leave it on for longer but not to long or u will have no bike left and don't put it near anything plastic or grips Edited May 1, 2006 by boris_on_trials Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.