shansen Posted January 5, 2007 Report Share Posted January 5, 2007 (edited) Hi, i was just looking to buy some cranks, and wondering what ones you guys recommend or what ones to stay away from Thanks Seb Edited January 5, 2007 by shansen Quote Link to comment Share on other sites More sharing options...
larrybailey~ Posted January 6, 2007 Report Share Posted January 6, 2007 i recomend the Echo 6061 Forged on tarty my m8 has just got some they are sweet!larry~ Quote Link to comment Share on other sites More sharing options...
Ollie Y Posted January 6, 2007 Report Share Posted January 6, 2007 well what bottom bracket have you got....what length do you need, and what cog size do you need. do you run a front freewheel, we cant recommend until we know properly otherwise it could be all wrong.cheers oli Quote Link to comment Share on other sites More sharing options...
moza Posted January 6, 2007 Report Share Posted January 6, 2007 i would recomend Try-all, look nice, fairly cheap and high quality.Moza Quote Link to comment Share on other sites More sharing options...
andyb Posted January 6, 2007 Report Share Posted January 6, 2007 I would agree with the try all cranks, will order some myself this week.i have the echo forged at the moment and they are starting to round off inside, not great when they are only 3 months old. Quote Link to comment Share on other sites More sharing options...
shansen Posted January 6, 2007 Author Report Share Posted January 6, 2007 well what bottom bracket have you got....what length do you need, and what cog size do you need. do you run a front freewheel, we cant recommend until we know properly otherwise it could be all wrong.cheers oliOk sorry, im looking for isis cranks 128mm BB and im running a 22th chain ring on the front but may have to buy a new 1 as 1 might need a screw on one for new cranks. Quote Link to comment Share on other sites More sharing options...
Ollie Y Posted January 6, 2007 Report Share Posted January 6, 2007 (edited) Ok sorry, im looking for isis cranks 128mm BB and im running a 22th chain ring on the front but may have to buy a new 1 as 1 might need a screw on one for new cranks. get middleburns then linky Edited January 6, 2007 by oliyoungman14 Quote Link to comment Share on other sites More sharing options...
andyb Posted January 6, 2007 Report Share Posted January 6, 2007 ditto.andy Quote Link to comment Share on other sites More sharing options...
shansen Posted January 6, 2007 Author Report Share Posted January 6, 2007 yeah middle burns any other recommended ones though nice to have a range (also ever one i ride with have them )Thanks Seb Quote Link to comment Share on other sites More sharing options...
andyb Posted January 6, 2007 Report Share Posted January 6, 2007 I had middleburns and thought they were great, they are so strong its unreal.only switched because i wanted front freewheel.andy Quote Link to comment Share on other sites More sharing options...
bonzojim Posted January 6, 2007 Report Share Posted January 6, 2007 hi, i always use try-all , never had any probs with them, phone trialsman he will sort you some out Quote Link to comment Share on other sites More sharing options...
mbuk Posted January 6, 2007 Report Share Posted January 6, 2007 HI there,i have got some try-all cranks,and there faultless,high quality,pretty light,look good,used by vincent hermance,and beintio ros so if there good enough for them they are good enough for us,and there pretty cheap.thanks shane. Quote Link to comment Share on other sites More sharing options...
shansen Posted January 6, 2007 Author Report Share Posted January 6, 2007 what try all cranks are they? Quote Link to comment Share on other sites More sharing options...
peterjamesbailey Posted January 6, 2007 Report Share Posted January 6, 2007 well,if your going isis front freeweel i would get either some echo 7075,or the 6061s,if your going sqare tapered i would suggest the 6061s or some onza mucle man,hope i helpedpeterhttp://www.freewebs.com/budetrials/ Quote Link to comment Share on other sites More sharing options...
clarkytrials Posted January 7, 2007 Report Share Posted January 7, 2007 echo cnc you no its the way to go Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.