rudirudirudirudirudi Posted March 21, 2007 Report Share Posted March 21, 2007 ok, im looking to get a new bottom bracket and are unsure of what size to get and how the freewheel will fit on. i will probably be getting either a truativ gigapipe dh, or a skf bfr 300. as i said before, im unsure of what size to get. i have a t lite if it helps. and the freewheel will be either a acs claw 18 tooth welded or a tensile. i have looked at other posts but cant find out how the freewheel fits onto the bb. it looks like the freewheel has a thread in it but i cant see a thread on the bb. thanks Quote Link to comment Share on other sites More sharing options...
charlie >est< Posted March 21, 2007 Report Share Posted March 21, 2007 ok, im looking to get a new bottom bracket and are unsure of what size to get and how the freewheel will fit on. i will probably be getting either a truativ gigapipe dh, or a skf bfr 300. as i said before, im unsure of what size to get. i have a t lite if it helps. and the freewheel will be either a acs claw 18 tooth welded or a tensile. i have looked at other posts but cant find out how the freewheel fits onto the bb. it looks like the freewheel has a thread in it but i cant see a thread on the bb. thanksWhat bike have you got? Quote Link to comment Share on other sites More sharing options...
rudirudirudirudirudi Posted March 21, 2007 Author Report Share Posted March 21, 2007 i think i sed in that post. but a onza t lite. i tryed measuring it but not sure how to. sorry. im pretty new to this Quote Link to comment Share on other sites More sharing options...
liam_thornton Posted March 21, 2007 Report Share Posted March 21, 2007 Get a Try-all isis bb.I think you wil have to get 127.5mm, not 100% sure. Quote Link to comment Share on other sites More sharing options...
ben.richardson Posted March 21, 2007 Report Share Posted March 21, 2007 The freewheel screws onto the crank but make sure you put quite a bit of grease on the crank. Quote Link to comment Share on other sites More sharing options...
rudirudirudirudirudi Posted March 21, 2007 Author Report Share Posted March 21, 2007 ooohhhhhh. thats how its done. i get it now. thanks. so when i go to take off my crank thats on my bike at the moment, how would i go about it? does it unscrew or what? thanks to your help Quote Link to comment Share on other sites More sharing options...
liam_thornton Posted March 21, 2007 Report Share Posted March 21, 2007 ooohhhhhh. thats how its done. i get it now. thanks. so when i go to take off my crank thats on my bike at the moment, how would i go about it? does it unscrew or what? thanks to your helpIf your on about how to take the cranks off you will need a crank extractor/puller, or a rubber mallet.If your on about taking the freewheel off you will need the proper tool, look on www.Tartybikes.co.uk. Quote Link to comment Share on other sites More sharing options...
Mod Man Leo Posted March 21, 2007 Report Share Posted March 21, 2007 at a gues i would sugest a 68mm by 113mm Quote Link to comment Share on other sites More sharing options...
charlie >est< Posted March 21, 2007 Report Share Posted March 21, 2007 (edited) Oh, Yeah, Im such an idiot. If your still not sure, ask tarty (or were ever your ordering from) Edited March 21, 2007 by charlie >est< Quote Link to comment Share on other sites More sharing options...
monkeymoped Posted March 21, 2007 Report Share Posted March 21, 2007 68mm by 113mm sounds about right to me Quote Link to comment Share on other sites More sharing options...
rudirudirudirudirudi Posted March 21, 2007 Author Report Share Posted March 21, 2007 (edited) do they even do 113 mm? the lowest i can find is 119. would 122.5 be ok? a try all isis i noticed that its got isis. is there any advantages of an isis bb? thanks for all your input guys. Edited March 21, 2007 by rudoxolty Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.