Jump to content

Headley

Members
  • Posts

    495
  • Joined

  • Last visited

Posts posted by Headley

  1. Dude never heard of them ? what are they ? new ?

    AshB

    i hadn't herd of them till today, i was out ridin nd one of my mates said he was using them, he said they're pretty good so i thought i might get some and see what they're like

    i assume it's spelt "phat"

  2. Why?! Several people have told you, you can just hold the star still by going up the steerer tube with a long screwdriver or such... you could really just undo the bolt...

    And besides, a drill will probably just spin the star and do little else.

    the whole problem is i cant get to the star nut but what im going to do is drill onto the bolt head until it's all removed and can get the top cap off

  3. I was putting my new stem on my bike and I was screwing the top-cap bolt on and found it stopped screwing any further in. What has happened is the center of the star nut has loosened and is now spinning as I try and screw the bolt in and is therefore not allowing the bolt to tighten. Has anyone had this happen to them, if so what did you do? Open to any suggestions.

  4. avid's main plus point is they're mechanical so no bleeding and very easy to maintain, also they're really cheap. One down side is they feel slightly spongy when you pull the lever but it's not too bad. Hopes on the other hand feel brilliant but do decide when they want to work or not as the case may be.

×
×
  • Create New...