CZARKID

deoderant +1

orate, my lever on my maggie seems to get so you can pull it closer and closer to the bar the longer you ride it after about 10 mins its at the bar. i was using the tpa to cure this but that not fully adjusted. also my clamps are really tight so it isn't that..........has anyone had this problems or got ideas how to cure it cheers

what front tyre is that mate

Ok cheers mate

Haha it's the iPod spell check thing it's bolloxs n it's meant to say disk but you probly knew that

Ok I bought a new disc to replace my bent one but the brake has gone shite..... Do they need bedding in or something... I set the brake up like normal..... Also I've cleaned the disk with heavy duty surface cleaner. But still not good braking. Any ideas

i also went from a t-bird to a python.....loads of difference.....i have improved ten fold since i switched( but I'm still shit just was ten times shitter)

orate....i bought some foam mbk grips on tuesday fitted them wednesday and by today i have worn a fairly large hole in them. i have not dropped them to have ripped them on a rock etc just worn through. are there any firmer grips as these seem quite soft. my mate bought some trial tech ones and he says there great. but i dunno if there firmer or not. cheers

i recall seeing a echo disc somewhere.... but may have dreamt it.....anyone know any information on them or if they even exist

both sides but now its still constant but very ligtly then stronger every so often......how do straighten it will be my next question.....i'm not the best person to fix a bike

orate... i bought a quad hydralic disc of my mate to replace my cheap onza caliper. i used the one 180 adapter thing and my 180 disc. the wheel would not turn so after ages of ajusting with washers and spacers we used my old more worn pads and it spins but rubs every so often any ideas cheers

ok......today i decided to give the bike a bit of tlc for once and as my old style maggie is well fooked i decided to get the new one back into action with a bleed and such, in the process i discovered the tpa was truley jammed so i ordered a new one but how can i get the old one off........ cheers

mine are 4 years and still going strong cant argue with that

nice bike mate but change them forks

i'm not one of these fair weather riders bit of rain hurt no one (until brakes slip) lol n ok mate i'll have a stroll up and see what i find

hey, tomorrow afternoon me and a couple of mates are heAding up to matlock as its local but we would like to have a bash in the quarry but as we've never been were wondering how to get there from matlock town centre......any help would be appreciated cheers alex

I'm a bit skint at the minute so i was think something more like £15 pound cheers

Alrite lads, i snapped my chain today, and after recovering some from very painful injures i started looking what to replace it with. I have not got a clue what all the 1/8, 3/32 and all that stuff mean so what do you recommend for a strong reliable chain. cheers alex

mine is same as yours mate and fits fine on my zoo python frame, on inside of the dropouts. theres a washer on the outside of the frame and then the cam on the inside. cheers

orate, The real reason I'm uploading these photos is because my pads are running low and i haven't got a clue what caliper the front brake is, hence which pads i need. so if you could answer that i'd be really grateful. but while camera was out i thought i might as-well upload some pics of my bike. Bit multi-colored but o well still rides nice. spec is: 05 zoo python frame echo forks rear profile laced to unbranded rim front echo disc hub on echo rim zoo stem zoo bars front disk (unsure on make) rear maggies with adamant 4 bolt booster and old zoo pads. tensile cranks and bashring.

I held my disc on for half a ride with 2 bolts which were to small and a load of duct tape. It worked surprisingly well.

Clamp the pipe in a vice using the clamping blocks (provided in the magura kit) then tap the barb fittings in using a rubber mallet. Hope this helps Alex P.s. The link to the clamping blocks if you haven't got any. http://www.tartybikes.co.uk/product.php?pr...p;category_id=5

If your a member on the trials central it could be a good idea to put the topic on there as well. I put all my motorbike problems (and trust me there's loads) and i normally get a good helpful reply within a day. cheers alex p.s. No dis-respect to the people on this forum by saying you will probably get a better answer on trials central. But it is a motorbike trials forum.

Steve Mcqueen by The Automatic

I tell him that every time i see him. but he reckons its comfy but its not