tdubz
-
Posts
855 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by tdubz
-
-
Exellent idea dave might give that a go!!
-
I might just bite the bullet and get a star
Nut
Gap in the market for trials manufacturers though
-
Ive got nukeprooof and i like them
-
Nah, only a small portion of the head will be in contact with the top cap, pushing down front first.
What do you mean? I thought the previous post might be a good solution?
-
Never had much luck with them in the past dave.
I fitted the gusset thing nearly 5 years ago and never had an issue, if all else fails i will go to a star nut no problem but i was just seeing if i could keep my gusset some way some how
-
try drilling it out to the size of the thread but not of the head?
Yeah that would be ok, but the head will not sit down in the countersink when it is done up, its almost as if the whole system would need to be one size increased, both the hole iself and the countersink
-
-
Thats what i was thinking Dr Stix, issue is the top of the steerer at the top cap end
-
Just got a new neon sloping top cap stem
I want to run my gusset headlock system with it but i am having some size issues
The threaded bar is too big to fit through the hole of the topcap, seems one size too much
additionally if i was to drill it out, the top of the bar where the allen key fits would not countersink into the topcap itself
is there any alternatives to the gusset headlock system which prehaps uses a slightly smaller thread
ideally i dont want to use a starnut, any homemade systems people used before
ill get some pics sorted now to make it seem clearer
many thanks
tom
-
I measured my original bokt andit was 4mm in width
God im confused now!!!!!!!
-
That is the M6 one you keep mentioning
If you read the description it talks about not suitable for GU frames
However this one is
But out of stock and doesnt give an "M" size for it so i can find one elsewhere.....
-
Yeah i get what you mean about the bolt length, i was referring to the width of the bolt, what size thread to use
-
It takes a size 2 allen key... So what bolt siZe is that?
-
Does anyone know where i can get a replacement?
Stan one from tarty currently out of stock and need a replacement fast!
Thanks
-
You need a rider to help with the marketing of it and who is gonna put videos out regulary.... Has anybody local put a vid out lately that would influence the public....
-
2
-
-
Looks really good Lewis
Make sure you facebook/post on here each episode well worth a watch!
-
1
-
-
Thanks mark easy solved then!!!!!
-
Here is the situation
Recently snapped my frame, it has a 116mm back end so naturally i have the same hub.
The hub is echo tr
I am looking around for replacement frames but before i make serious decisions i was wondering.....
A mate of mangled his old tr hub where the cog attaches but this was a 135mm hub same as mine.
Could i swap the axle into my 116hub (i know tarty sell a 135 hun axle) and it would work? And how difficult is this to do?
This could broaden my frame searching quest!
Thanks
-
Aron is very heavy though!!
-
Running an xposure slick bmx cable.... Can anyone recommend a really good cable lube to use?
-
Maguras are hydraulic
Yeah i know. I was referring more to the feel of the pull
-
The 4 finger lever on my magura felt good though?
Thought this wud just be the same?
-
Yeah a longer blade v brake lever
How so family biker?
-
Going back to v brakes for winter after an enjoyable summer on a 4 finger 2005.
I currently have avid sd7 levers from when i previously ran v brakes.
But i need to find a lever which is as near as dam it to the maggy four finger.
Any suggestions?
Thanks
Running Gusset Headlock With Neon Sloping Top Cap
in Trials Chat
Posted
I caved and ordered a star nut