Dec Whiteoak

cheers and yeah it makes sense thanks alot,might give that a go.

ok thanks,but the chemical metal that i put the link up of says it can be drilled,tapped so im going to give this a go and see what happens,like you said it is pretty strong

not really a bodge is it and ive already bought the heli coil kit.

NO BECAUSE I WANT TO USE M5 BOLTS,THEY SIT BETTER IN THE MOUNTS!

would this work if i filled the mount hole with it and started from scratch? http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_199433_langId_-1_categoryId_165691#dtab

yes but can i fill the hole with weld and start again with the tap supplied with the kit?

is there any way that i could fill the whole and re drill it to correct size?

ok cheers

yes but will the m5 coil fit in still as the coils are quite thick arnt they?

hi, two weeks ago i stripped the threads out of the magura mounts,i did a quick fix by putting the next size up bolts in,5mm head ones,now i have bought a m5 helicoil kit im just waiting for it to be delivered and i was think will the coil still fit in since the hole is slightly bigger? cheers

you can get them from chain reaction cycles at good prices halfords also do them

JUST PUMP IT !!!! HAHA TOOK FOREVER

go into a local car garage and they will have something to take it off.

very nice rob !! your sidehops are getting well better!!

weather is meant to be crap but if its ok i will be there

+1

hopes are by far the best but at the min i am using a magura louise and that works great

Pads: rockman blues Time used:2 months Rim used:echo urban rear Grind: Yes Ceraminc: No Brake used: Magura hs33 water/antifreeze bled What is your opinion of a working brake:a brake that i can trust to do big gaps and something that i can just trust all round How do they compare to previous pads you have used:i did use phat pads but they are noyhing compared to these Review:the best pads ive used,very loud,excellent bite and amazing hold

have you got grease,oil,wd 40 etc on your rotor?

i will probably show up,weather dependent like you said

rockman blues easily equals win

i bought a limey 320 and never look back they are ace.

looks like it will be tarty doing it for me then cheers

hi there,my thread on my frame where you screw in the magura mounts has stripped,i have seen the tartybikes service of helicoiling but i hav seen a kit where for £20 i was wondering if anyone has tried it or is there another way to restore the threads? thanks

fsa pig is a good headset i have one and they only cost 20 quid