Josh PWND Posted March 1, 2008 Report Share Posted March 1, 2008 What type are in t-pro rear hubs desperatly need to know as i cant ride my bike without. Quote Link to comment Share on other sites More sharing options...
Bionic Balls Posted March 1, 2008 Report Share Posted March 1, 2008 does it have cone nuts? if so...it just has ball bearings rolling around...if not...you need to knock your axle out and take a look at the bearings- they have a number on them somewhere. More often than not...its 6000adam Quote Link to comment Share on other sites More sharing options...
Josh PWND Posted March 1, 2008 Author Report Share Posted March 1, 2008 think its the top one where do you get ball bearings from as they look quite big Quote Link to comment Share on other sites More sharing options...
gussie Posted March 1, 2008 Report Share Posted March 1, 2008 (edited) think its the top one where do you get ball bearings from as they look quite bigI suggest going to halfords. Take your old ones just to make sure they match.gussie Edited March 1, 2008 by gussie Quote Link to comment Share on other sites More sharing options...
Josh PWND Posted March 2, 2008 Author Report Share Posted March 2, 2008 (edited) Had a look today and its the cone ones and just has ballbearings rolling around im missing about 5 on one side and 1 on the other anyone know where to get them from.Or what size i would need Edited March 2, 2008 by Josh Ack Quote Link to comment Share on other sites More sharing options...
ogre Posted March 2, 2008 Report Share Posted March 2, 2008 Had a look today and its the cone ones and just has ballbearings rolling around im missing about 5 on one side and 1 on the other anyone know where to get them from.Or what size i would needgo ter a proper bike shop, they will actually know what you want, makesure to take the hub/wheel the'll probably do you new cones and stuff for cheap to (the cones get f**ked when you loose bearings) it's a good idea to do the whole lot over as it will cost >£5 Quote Link to comment Share on other sites More sharing options...
NVWOCI WVS Posted March 2, 2008 Report Share Posted March 2, 2008 you need 9 quarter inch bearings per side (18 in total) put them in with medium density grease (purple grease or lithium grease is will be perfect) don't over-tighten the cones. Quote Link to comment Share on other sites More sharing options...
Josh PWND Posted March 2, 2008 Author Report Share Posted March 2, 2008 all sorted now anyway just pinched em outa bmx Quote Link to comment Share on other sites More sharing options...
cai Posted March 3, 2008 Report Share Posted March 3, 2008 all sorted now anyway just pinched em outa bmxlolMy advice is to start saving up for a real hub (open sealed isn't a good idea for trials), my old one started eating the inside of itself after about 2 months - brought an Echo hub (sealed bearings) and not one problem since! Quote Link to comment Share on other sites More sharing options...
jsy trials matt Posted March 3, 2008 Report Share Posted March 3, 2008 take it to a cycle shop, they do it for £6 or somthing like that Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.