Jake Beach Posted February 13, 2010 Report Share Posted February 13, 2010 Alright, getting fed up of my HS33 now, do the bolts up as tight as possible, they are greased, my cylinder slips. Any suggestions to stop it slipping? I have Tensile clamps, Trialtech booster and the standard bolts on a T-Comp frame Any sugestions to stop it slipping would be appriciated, Jake Quote Link to comment Share on other sites More sharing options...
Luke.P Posted February 13, 2010 Report Share Posted February 13, 2010 Wrap the cylinders in duck tape (1layer) and you will have to like half the tape, and only use one layer or it will be to thick. hope this helped Quote Link to comment Share on other sites More sharing options...
Jake Beach Posted February 13, 2010 Author Report Share Posted February 13, 2010 Wrap the cylinders in duck tape (1layer) and you will have to like half the tape, and only use one layer or it will be to thick. hope this helped Tahnk you Will try it now Quote Link to comment Share on other sites More sharing options...
WIGAN Posted February 13, 2010 Report Share Posted February 13, 2010 if that dont work grind the lip off on the top half of the clamp to get more CLAMPING POWERRR!! Quote Link to comment Share on other sites More sharing options...
Mark W Posted February 14, 2010 Report Share Posted February 14, 2010 /\ What he said. Alternatively, if you've just got the boosters/bolts, make sure the bolts aren't bottoming out in your frame before they're fully done up tight. Quote Link to comment Share on other sites More sharing options...
crispyboy Posted February 14, 2010 Report Share Posted February 14, 2010 Alright, getting fed up of my HS33 now, do the bolts up as tight as possible, they are greased, my cylinder slips. Any suggestions to stop it slipping? I have Tensile clamps, Trialtech booster and the standard bolts on a T-Comp frame Any sugestions to stop it slipping would be appriciated, Jake They are the worst mounts ever they dont hold at all Quote Link to comment Share on other sites More sharing options...
Dan6061 Posted February 14, 2010 Report Share Posted February 14, 2010 I have the Try-All mounts where you don't need those plastic clip things for the cylinders. Brake set up has never been so easy! I'm just lucky that my mounts are square, so my pads land flat on the rim. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.