Kieran Morrison Posted February 2, 2011 Report Share Posted February 2, 2011 Hey, just got a new tpa as my last one threaded, how do i get the old one out of my lever blade? Cheers Quote Link to comment Share on other sites More sharing options...
LukasMcNeal Posted February 2, 2011 Report Share Posted February 2, 2011 Hey, just got a new tpa as my last one threaded, how do i get the old one out of my lever blade? Cheers Remove the lever blade. Undo the tpa as far as you can (as if you were turning the tpa in). When it gets stuck use a screwdriver and a mallet/hammer to knock the tpa wheel round until the metal part falls out Quote Link to comment Share on other sites More sharing options...
Miles Mallinson Posted February 2, 2011 Report Share Posted February 2, 2011 Put the end of the bolt in a vice and pull the threads will just come out but not on the bolt just the dial. Quote Link to comment Share on other sites More sharing options...
j-bonham@hotmail.com Posted February 2, 2011 Report Share Posted February 2, 2011 (edited) if it's an 05+ lever you just keep unscrewing the tpa wheel untill it comes apart. or if it's de-threaded yank it out with some pliers..... Edited February 2, 2011 by j-bonham@hotmail.com Quote Link to comment Share on other sites More sharing options...
dirt jumper jake Posted February 2, 2011 Report Share Posted February 2, 2011 i just drill the fanny out. Quote Link to comment Share on other sites More sharing options...
j-bonham@hotmail.com Posted February 2, 2011 Report Share Posted February 2, 2011 i just drill the fanny out. Why would you ever need to drill it? should just pull out no probs...... Quote Link to comment Share on other sites More sharing options...
dirt jumper jake Posted February 2, 2011 Report Share Posted February 2, 2011 Why would you ever need to drill it? should just pull out no probs...... cos when all my 05s break, thats the only way to get them out. i have a habit of royally mashing up tpas 1 Quote Link to comment Share on other sites More sharing options...
LukasMcNeal Posted February 2, 2011 Report Share Posted February 2, 2011 If you have to drill it out your doing it wrong!! Quote Link to comment Share on other sites More sharing options...
dirt jumper jake Posted February 2, 2011 Report Share Posted February 2, 2011 If you have to drill it out your doing it wrong!! Im a farmer, bodging is the way forward. plus its easier just to stick it in the pillar drill than f**k about with a hammer and screwdriver unscrewing it Quote Link to comment Share on other sites More sharing options...
Kieran Morrison Posted February 2, 2011 Author Report Share Posted February 2, 2011 I just used an adjustable spanner to unscrew it, worked waaay easier than i thought it would. Cheers for the replies everyone. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.