craigmatthews17 Posted July 11, 2011 Report Share Posted July 11, 2011 So i notice most cranks these days dont have any arms on to mount a sprocket or bash ring?? Can someone enlighten me on how this works if you have a rear freewheel... possibly send me links to a good crank bash set up i could use thats relatively small Quote Link to comment Share on other sites More sharing options...
Revolver Posted July 11, 2011 Report Share Posted July 11, 2011 (edited) Most trials cranks have a thread instead of a spider. You can either put a freewheel on there or a fixed sprocket, to compliment what's on the back. To fit a bashguard, you put one on the cranks before screwing anything onto it. The freewheel or sprocket holds it in place. Edited July 11, 2011 by Revolver 1 Quote Link to comment Share on other sites More sharing options...
craigmatthews17 Posted July 11, 2011 Author Report Share Posted July 11, 2011 I cant seem to find a screwed sprocket.... Quote Link to comment Share on other sites More sharing options...
Revolver Posted July 11, 2011 Report Share Posted July 11, 2011 You're looking in the wrong place. Screw-on fixed sprockets are very common in the trials world but not so much in other areas of cycling. As such, your best bet is good ol' Tartybikes. http://www.tartybikes.co.uk/screw_on_sprockets/c73.html Quote Link to comment Share on other sites More sharing options...
craigmatthews17 Posted July 11, 2011 Author Report Share Posted July 11, 2011 thats pretty cool so you could have a freewheel at the front instead of that back! im not used to all this new wave stuff = ) thank you for the link though, so the sprocket holds the bash ring in place Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.