craigmatthews17

Echo control short 09 Mad Phase forks hope mono trial, maggy brakes. echo bb, cranks, eno front freewheel trialtech grips, stem, and hubs, mavic wheel front random disk wheel inspired riser bars this is the built so far, few bits need tweaking would prefere a wider rear rim now for more balance and pinch flat issues, some decent forks aswell Hope you like it, its a big step for me from the old orange zero days

Tricks and stunts vcr played over and over to learn to blunt and bunny hop ... wanting kona p2 forks or whever they were called.. crud catchers wanting a d521 with LX hubs for christmas oh god... i have a picture from when i was 12 on my ddg shooter with enough colours on it to show up a rainbow

Why you quit for there are quite a few of us that get out and about bud

That was what its all about boys! great fun, good to watch and looks like you had an amazing time = D. orange bike, creeky, lots of respect for guy riding brakeless and some good bails. 10/10

Alright guys and girls, we are out and about occasionally, usually at-least once a week or more either in southampton or surrounding area, met a few people along the way, but havnt got any contact details. If you could add a reply below, we can let you know or you can let us know when a ride is going on. Thankyou, Craig.

Thankx for coming along mate, see you soon

Hi guys a few of us will be out and about southampton tomorrow evening if anyone wanted to join us for a ride out? let me no , Craig

Yes i did see if you took the lock ring off to open the freewheel you would get more contact but i didnt have a tool to remove this either! anyway. after spending nearly a grand if not more at tarty my bikes finally finished!! = ) and the Echo control is soooo nice on the back wheel it just wants to stay there im very happy = ) and Tartys service is second to none never had such fast delivery and ive got about 50 stickers, 5 chainstay protectors sweets and a tshirt lol

exactly! the tabs are so bloody thin!! i just popped into work work again, basically had to strip the guts out of the hub then use several washers nuts and m12 studbar through the hub clamped it all tight and it only just came off the tabs on the eno are fooked!! haha

i did indeed use a bolt to clamp it all in place! i will get pictures eventually just takes ages to upload from phone ect.. so after spedning nearly 90quid on a freewheel and then 10quid on a tool recommended by tarty it now is not coming off.... its less than a month old!! the tool doesnt look like it fits in the freewheel properly, but they obviously no more than me.

Alright guys, im trying to take the eno off of my rear hub and mounnt it on my cranks, anyway im a mechanical technician by trade so i no what im doing before you all slate me. basically i mounted the tool in the vice, put the wheel on with the bolts in ( abit loose to allow for the initial move ) we applyed plenty of force and then bang, all four corners of the freewheel stubs to undo it rounded off, well sheared off leaving a rounded edge.... How the hell is this going to come off now! was a brand new freewheel aswell and now its buggered Brought from Tarty bikes : Eno freewheel and this cyclo freewheel tool stating: At last... a good quality removal tool that fits ACS and White Industries ENO freewheels well (plus Echo, V!Z, Try-All, Monty etc)! - As used in our workshop to great effect on all freewheels. - This tool works best when bolted to the crank or wheel, then holding the tool in a vice and using the wheel or crank arm for leverage. - High quality steel construction with large flat section at the rear of the tool.

thats pretty cool so you could have a freewheel at the front instead of that back! im not used to all this new wave stuff = ) thank you for the link though, so the sprocket holds the bash ring in place

I cant seem to find a screwed sprocket....

So i notice most cranks these days dont have any arms on to mount a sprocket or bash ring?? Can someone enlighten me on how this works if you have a rear freewheel... possibly send me links to a good crank bash set up i could use thats relatively small

so basically use the 22t and 18t freewheel as ile get used to it....