trials hoe Posted November 3, 2012 Report Share Posted November 3, 2012 (edited) right so i finaly got everything together, bled my brakes down (tr levers) and they feel like they're too close to the bars, even for my stubby fingers. the grub screw reach adjusters are undone but i'd prefer them further away, i had the thought to file down the face that contacts the body (where the reach adjusters sit) to gain a bit of disatnce. has anyone else had this issue and rectified it? also would it work? (i haven't took the levers apart so i don't know if there will be any other parts that would need to modded) crude writing in the pic says it all, cheers Edited November 3, 2012 by trials hoe Quote Link to comment Share on other sites More sharing options...
AdamR28 Posted November 3, 2012 Report Share Posted November 3, 2012 Yep, that'll do the trick. Quote Link to comment Share on other sites More sharing options...
Maxx Posted November 3, 2012 Report Share Posted November 3, 2012 But you'll need to rebleed them (volume increase) Quote Link to comment Share on other sites More sharing options...
AdamR28 Posted November 3, 2012 Report Share Posted November 3, 2012 That's true. And it will also allow crud to get into the system, as the lip seal won't be sealing any more... Just woke up and posting on your phone for the lose Quote Link to comment Share on other sites More sharing options...
SamKidney Posted November 3, 2012 Report Share Posted November 3, 2012 (edited) Just wind the tpa in the appropriate amount to conpensate the extra reach? Still seals and feels better... Edited November 3, 2012 by Echo Lite 09 Quote Link to comment Share on other sites More sharing options...
trials hoe Posted November 3, 2012 Author Report Share Posted November 3, 2012 everybody sounds right to me, will give this a go. cheers guys! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.