Jeza Posted February 15, 2006 Report Share Posted February 15, 2006 Hi all,I have a problem, i am current running the new echo cnc'd hub on an old levelboss mod the one with black stickers, anyway everytime i tighten up the wheel it is all centred then after a kick(to back wheel invoving a fair bit of force) it moves across to the opposite side of the drive side, i have added washers with grip hoping that would help and also i have tried doing it up super tight also no luck!Anyone got any ideas??Really annoying, making each ride annoying and i really want to ride but feel that there is no point as i get considerably annoyed with the brake squeeking as it has moved across, i run plazmatic pads so noisey pads anyway.Thanks Jeza Quote Link to comment Share on other sites More sharing options...
poopipe Posted February 15, 2006 Report Share Posted February 15, 2006 chain tugs? it's slipping when you pedal right? Quote Link to comment Share on other sites More sharing options...
Jules Posted February 15, 2006 Report Share Posted February 15, 2006 Get some snail cams. Quote Link to comment Share on other sites More sharing options...
Jeza Posted February 15, 2006 Author Report Share Posted February 15, 2006 I have snail cams, the new echo hubs come with some, i thought this at first also, i was thing maybe the washer was too small for the dropout height, Quote Link to comment Share on other sites More sharing options...
PaRtZ Posted February 15, 2006 Report Share Posted February 15, 2006 (edited) By the sounds of it try the following1 ) Tighten the snail cam to the next tightest setting, so that when you pedal its still pretty tightOR2 ) As you start setting it up, put some pressure on the pedal, then if it jumps out again, correct the tension, THEN tighten the wheel nuts/boltsOther than that Im stumped EDIT: my god im talking sh!t tonight lol Edited February 15, 2006 by PaRtZ Quote Link to comment Share on other sites More sharing options...
the judge Posted February 15, 2006 Report Share Posted February 15, 2006 I think chain tugs would sort it as they pull on the back of the dropouts and so they would prevent the wheel from moving forward Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.