M5 Bolts For Magura 4 Bolt Mounts

[Dan Jones]

I'm looking for the 4 bolts for the Magura 4 bolt mounts.

I found them on this site www.stagonset.co.uk and wasn't sure if they are ok to use as it says:

"Presently we offer standard metric fasteners in A2 grade stainless steel, perfect for corrosion resistant applications and ideal for motoring and marine duties. If you are replacing ordinary steel bolts then please be aware that A2 stainless steel has a slightly lower tensile strength than standard 8.8 grade plain carbon steel bolts."

Does anyone know if they will be strong enough or alternatively a good place to get the bolts from?

Thanks

Daniel.

[sir trial a lot]

they will be fine just think, you are most probably going into aluminium (most modern frames), therefore the alu threads will definately go before the stainless bolt

[MikeCottTrials]

while where on this topic where the hell can i get the spacers you need to run a booster

[Janson]

Get an aluminium pipe with outer diameter of 8mm and inner diameter between 5.1 and 6mm and hacksaw some up. Probably cheaper, and you can get the perfect length for your brake set-up (xtr boosters require long spacers when ran with alu backings for example, unless you wanna file the booster).

sorted.

[Egg Fried Rice]

dave85 sells bolts AND booster spacers, he makes them apparently

JK