Mr Motivator

Well that shouldn't make a huuuuuge difference. You can allow a little like that :P For example, all my spokes on my front wheel are 2mm too long, theyre fine :D

Blackboard doesn't work and I can't download my drawing handouts so I wondered if you guys could give me a little hand. I need to know the Advantages and Limitations of using Oblique (45deg) and Isometric (30deg) drawings. Hmmmmmmmmn Sammm

Get out a tape measure and work out the Effective Rim Diameter, and then with the hopetech.com spoke calculator your away :D

Mech hanger: £10-£15 Sam's hanger saver: £3 Use a saver and you'll never have to spend more that 3 quid :D

Pure genious this is.. Carry one of these babies around with you on your keyring, and when you snap your mech hanger, pop off the bolt/QR, screw the mech out of the snapped part of the hanger and then put the 'hanger saver' behind the bolt/QR and use the threaded part of the snapped hanger as a bolt to secure the mech to the 'hanger saver'. Propper job, hanger fixed. Well, it will let you carry on with the ride! Of course, you could always keep the hanger saver under the bolt/QR and mech all the time if you wanted to and that would stop snapping the hanger all together!! The holes are 30mm appart from each other, so should fit a wide variety of hangers. (It will fit any snapped hanger) I made something like this a while back with 0.5mm thick steel, it was too flimsy and just bent. I have a few foot of 2mm thick flat Iron here, so am going to make a few decent ones, pollish them and lacquer them up. So if you want one, PM me :P Sam

Just get more pashleys Ash! They're only 50 poonannys and the black will look good with the black stickers on your red frame :( Or get Alex's Leeson forks and spray them black?

Yeah, sick. When they were in the shower, I saw boob :(

Dunno if I can come now Charlie..

Might have to get a 24 one day. That looks REALLY nice!

Get a decent disk brake alex.

I have blue Raleigh caps. They're pimp.

Why so many pictures of such a tiny wall?

'The f**k you on? 3. CNC is actually weaker than forged hubs, even though most hubs are now CNC'd 4. how the hell is it going to work in a Leeson!?!?! Get real man!

Great, if you skate (Y)

It's working now (Y) I havn't turned my pc off either since this morning. I officialy do NOT understand this machine.

Yeah, for sure (Y)

£115!! Get a King for that.

Yeah Ash, just get a Hope Mono (Y) Let's just face it, there is never going to be a Hope Pro 2.

Justices are 98mm I THINK! edit: well give or take lol

The new Zoo! forks (Y)

A few people have done it, it should be ok. Just get a different rim if need be.

1. No 2. No 3. Doubt it 4. No 5. No 6. All depends on what gear ratio your running!

Hmmn, Sunday. Maybe then!

Ah nahh (Y), I could to tuesday!

Charlie, whip off the E clip on the rear and fill the insides with araldite, let it dry and put it back on so it'l be locked out properly (Y)