Laurence--Trials

This and this. There was a programme on 9/11 recently about the conspiracy, anyone else see it? Just putting this out there, was in the news paper yesterday: http://www.metro.co.uk/news/874946-9-11-premonition-artwork-drawn-13-years-before-attacks I was quite young.. i must have been 6 when it happened but i remember having a 'picnic' in the lounge with my dad watching the news about it. Did anyone atall survive from inside either building?

Put a coin in the clam and put the bolts in upside down and tighten them up to open up a clamp. should go in a treat then.

Ooh... is the rim diameter 24" Im not good at this stuff

Okay using a spoke calculator: http://www.wheelpro.co.uk/spokecalc/ Wheel: http://www.tartybikes.co.uk/24_inch_wheels/onza_zoot_wheelset/c538p11426.html (front wheel) Hub: http://www.tartybikes.co.uk/front_disc_hubs/echo_tr_disc/c20p10705.html I've got everything apart from the rim offset? i don't know what it is... EDIT: Tried to do it without (because it said you didn't need rim offset) and i got this: Bad wheel data The rim diameter is smaller than one of the specified hub flanges. Hub flange diameters A. Left 56mm B. Right 30mm Flange distance C. Left 25mm D. Right 31mm Rim dia 31mm spokes 32

If i were to go mod again i would go duel disc brakes but anything above that size should have a rear magura in my opinion. Any type of brake on the front though.

http://link.brightcove.com/services/player/bcpid1030965791001?bckey=AQ~~,AAAA4mHNTzE~,ejlzBnGUUKZsS_DZeHScvEw2NS0lYgvy&bclid=975107451001&bctid=1149987862001

Really good actually, better than any mod tyre i've used. Very grippy.

Holy shit hes going fast.

The reason its got the ones on the top tube is cause the it looked a little plain without them there. It also looks really plain and boring without the stickers, not a fan of the stealthy look.

I agree, but i wanted black and green so for me monster stickers were the answer Thanks for helping with the pics isitafox

So got this bike a few months ago, slapped on a few new (lighter) parts and monster stickers and here she is! Planning to upgrade to 180mm front disc brake. Spec on request.

2012

Mines just temporary, i've got an 04 magura body + lever on the way.

I've done the same, i done know if this is your problem too but i have my tpa too far out. I'd suggest getting a metal TPA. I have a new brake lever on the way so i've just bodged mine by putting a stone in the piston it works

Make sure they're set up perfectly square especially if they're CNC backed.

Odd music, cant decide if i like it or not... eather way amazing riding! and the smooooooooooothhhness!!

Okay fair enough. Will do in the morning, thanks you two for pointing me in the right direction.

surly someone on here would know? Currently: Feeling lazy.

I'm not going to build the wheel but i just want to know if i can use the same components. i want to build an onza zoot rim with standard spokes and nipples onto a ZHI disc hub (pictured below.) The hub i'd be coming from would be a standard onza zoot hub (also pictured below, im sure you can figger out which is which.) My problem is will i be able to use the same spokes with the new hub? So could i ask the builder to do 2cross (standard) lacing on the smaller flange and on the larger flange do 3 or 4 cross?? if this is possible which one would it be? 3 or 4 cross?

What bars and what stem?

Okay i think i know whats wrong. Take it off, twizzle it round 180 degrees and screw it back on. It'll run VERY close to the spokes but it looks good and works with no problems. It'll probably be VERY hard to get off, i bent a steel bar getting one off my 20"

About the chain rub, what sprocket are you running? i had that problem on my zoo 20" it does cut into the frame. I simpley changed the sprocket and the problem was fixed.

Amazing!! Shame about the music though

That is a HOT bike.