trialsiain

ok ill video it tomorrow

ok thanks mate ill try tomorrow

How do i gap further i can only just do six foot but when i gap i tend just to go down and cant get the bike to lift up in air very easy.

unlucky..

kk ill keep my 24" echo circle holed one then

Hi what are Viz square holed rims like for keeping grinds ?

heres my echo sl 2 and a half years old of pretty much every day riding another one on its way

Which is better ?

the big betty will hit off the tail bit probably though

Hi i have a 24" echo trial and the chain has one link a half link. when i have my chain tensioned the pads seem to come off the rim a little bit towards the tyre and the mounts are as far as they can go that way. How can i stop this ?

didnt quite know if my cousin was taking the piss by telling me to do that.. he probably was though :L

rockman ones have booster so there probably best

can you bleed them with milk ?

ok well i officially fail at bleeding tried to bleed it 7 times and this keeps happening

hey when you bleed and have tpa fully off when you pull brake after bleeding should it need half a lever pull before pistons come out ?

Frame and forks Echo trial Trialtech sport disc Wheels front - rockman bub, spokes, trialtech rim rear - echo tr hub,spokes, echo 24" rim front tyre- scwalbe rocket ron rear tyre - scwalbe big betty kenda tubes Brakes Magura hs11 rear hope tech x2 front drivetrain cranks- trialtech 175mm freewheel- echo sl bb - echo titanium pedals echo tr cage bashring - neon full bash modifed to neon halfring sprocket - 14t screw on Steering stem- trialtech 20" stem bars - trialtech sport riser headset - echo sl purple grips - trialtech foam Weight- 8.75

i noticed when i pull brake it pushes wheel over a fair bit

ok Thanks ! using oil or water ?

this brakes is actually my cousins but im using it atm.. cause i cant seem to get a good bleed with a hs33 so im considering just bath bleeding hs33 any one have step by step instructions on how to bath bleed. All help appreciated Iain

i dont think thats the problem though it locks the brake and then keeps on goin a bit

Hi how do i stop this being spongy brakes are set up close to rim and theres no flex on frame it has a little resistance when you pull it ? http://www.youtube.com/watch?v=2dWIOG2JO28

just got frame (echo 24) and im using 2 bolt booster

yea ive been bleeding it with tpa minus but i cant do it right still haha

i was wanting help actually ..

just bled my magura hs33 and done it right and no air came through but even when i have pads really close to rim its spongy as hell.