trialsiain

might be a stupid question but im changing chains and wondering what is the correct way to join it ? do i take pin half out

dont need to travel that far either

- Extra thick steerer now features an integrated crown race (45 degree - perfect for Echo SL headsets), reducing the stress riser at the bottom of the steerer tube. You must run a sealed bearing headset with 45 degree lower bearing with these forks and no crown race, or the warranty will be void.

were you using a crown race on forks ?

nice

Hens *

well my cousin was in no way a basher and he broke slate 2 and kortz biggest drop would probably be an ibc crate

my cousin had 2 one snapped in 2 months the other 6 months

hmm but i could do it yesterday no bother

hey i can normally sidehop 5 pallets but suddenly i cant and every time i try it i just put my foot down before i get up . help please ! :/

ok i was just wondering as i found a cheap monotrial but id need a 200mm rotor would i catch it on stuff ?

would a 200mm rotor be too big for 24" echo trial

i dont know how much the frame is worth but the cranks,back brake and freewheels are really good

free willy

http://www.monty.com.es/images/ComunicadooficialM5E.jpg

ok the brake thing fixed itself and the brake is extremly bitey and loud now

is that in new forest and what pads are they when i use a booster with my echo 24 its quiet

http://www.youtube.com/watch?v=yoXXokpSKtE&feature=youtu.be

what pads make noise with booster on

oyea thats another question.. my brake on echo 24 is quite flexy well the frame is and could it crack frame ?

there very close just now

the levers moving at same rate as pistons with no tpa but the lever pulls to bars

but the lever pulls far in with no tpa

my bars were creaking once and i noticed there was tiny bits of grit so i wiped it and its been fine ever since

Hey i have this problem with the magura. i wind tpa to mins set pads good then wind tpa plus a little just to make it feel harder then i pull brake and one goes close to rim and other goes far away and the one thats close catches when i wheel backwards . help please