Wingerz

I've already got some of that so I think I'll give it a try and rebleed it then hopefully it should be working well, cheers for the help

I took the piston out, sanded it slightly and streched the spring. It's still not perfect but much better than before, I think the piston needs to be sanded slightly more but it works well enough for now. Thanks for the help

When I pull the lever there's alot of play before there is any pressure and the pads move. So I took the lever blade off and used some pliars to pull the piston out a mm or two, this completely got rid of the play in the lever but when ever I pull the lever in again the piston goes back to the original position. Is this a sticky piston? If so how do I get rid of the problem? Hope this made sense Cheers Henry

Ah cheers mate, I didn't think the frame would have much flex in it from its design but wasn't sure, thanks

Sorry bit off topic but ... What type of booster are any of you using on a 07 frame? Im running a V atm with a shimano carbon boster but im swapping to dual maggie so any help on what booster works well on an 07 would be handy! I'll get a picture up later

Best video i've seen in ages

Doing something thats good for my standard of riding does and riding with mates.

Thinking of doing something like this: could be quite tricky to do though

Sorry to steal the thread but i thought theres no point starting a new one for a couple of questions 1. Do you need a special type of spray paint or is any that says it works on metal okay? 2. Do you put anything on top of the paint after its dried to protect it from scartches ect?

Thinking of spraying my frame because I think it looks pretty boring at the moment, any suggestions? Also what type of spay paint would I need or is any fine? Spec If anyones interested Frame: Zoo Python 07 Forks: Onza Headset: ZHI Bars: Monty Risers Stem: Trialtech Front rim brake: 04 HS33 with Onza Citrus pads Rear vee brake: Heatsink adaptors, Avid SD7 lever, Shimano arms and XTR carbon booster with unknown cable Bb: Trialtech Race ISIS Pedals: Wellgo platform Cranks: Trialtech Sport forged Bashring: Echo Urban Freewheel: Tensile 60 click Wheels: Onza

I've got one of those Echo external bb if you want to buy it. Drop me a pm if your intrested and il check its working okay and get some pics.

I need to get some isis cranks, 165 or 170 length and preferably black. I don't want to spend much but the cheapest ones on Tarty are £50+ and there don't seem to be many in the sale section at the moment so I was wondering if there are any other websites that would sell cranks cheap new or secondhand??

This is how i set up my hs33: Get an old credit card or any bit of card or plastic, whack it the gap between the rim and pads and push the cylinder so it holds the credit card in place. Then tighten the bolts whilst still pushing on the cylider then wiggle out the card and this should mean your pads are set up square to the rim. I've only done it a few times but it works for me.