mrBENN

You my friend are a legend my email is ben_henderson_1@hotmail.com Kudos for you for doing that for me will get a load knocked up when i have a chance and show you the outcome. Many thanks again. Ben

Yeah we do. I mean I'm out most evenings anyway around the Benfleet/Rayleigh Weir area so drop me a inbox if you want to go for a ride atall

Will do matey your only down the road so come out for a ride sometime and i can get you some after your respray.

Yeah, whenever i can't promise i can get them done straight away as my Alevel exams are all next week but i will try my best

Yeah sure just inbox me the logo and i will knock a couple up for you Just let me know colour and dimensions.

They are actually proportional to one another but I'm not sure if its just because the picture is taken from a slight upper angle but yeah just needs some more fine tuning and it will look alright

Thing is the original image i had was straight from the GU website so it was pretty good :\ Just done a quick tester from the images I've been given and this is what I've produced. It's about 10cm wide just so i could see any imperfections and where the improvements need to be made so it was done just bye eye to eye adjustment really. Didn't turn out so bad to be honest

Thats alot better thank you will work with it properly on my program but thanks for the effort of doing it

Nice Vid but

Thanks very much man

Yeah true. I mean atleast i have the image now that i can actually work from

Yeah thats the one i need will see what i can do with it and make it a bit smoother. If anyones got a bigger one please post. But thanks Matt for the photo Much appreciated.

I managed to do these a while back when i nabbed the leeson logo off the internet and they turned out fine And the logo's are sometimess a bit pixilised but you can just easily edit them by eye yeah iv'e done gu ones before but iv'e lost the file and i just need the image :\

Trust me, i only need it as a jpeg been cutting vinyls for years and never had problems using jpeg images.

Hi guys. I'm in need on the GU logo as I'm making some vinyls for my bike but i need a jpeg image of the horizontal logo, not the vertical stacked one thats on the headtube. If anyone can get a decent image it would be much appreciated. Many thanks.

So just went out for a small ride and heres some photos of just getting used to the bike ''Catching the breath'' Sidehop To Rear Sidehop To Rear

So, after finding a crack in the Zenith frame i decided to go on the hunt for a new one. After previously owning a 06 GU mod i decided to go and look for a 06 GU stock and so happens i found one. Would like to thanks Leigh_Verner for the fast postage of the frame and other parts. Received the frame about 2 hours ago..Gave it a respray and literally just finished re building the bike up so here she is. Spec Frame - GU Typhoon 06 Forks - Onza Fly Guy Rear Wheel - Onza Front Wheel - Onza Headset - WTB Stem - Onza Bars - Onza Carbon Front Brake - Avid BB5 Rear Brake - Echo 2011 ZOO! Pads Cranks - Tensile Freewheel - Tensile . . . . All comments welcome

I will do matey :)Needs a proper scrubbing down and respray....any ideas for a colour?

1075, 375, +25, 72 i thinkkk

Yeah sorry i didn't really bother reading everyone elses thoughts i just saw the topic and added my input lol Thanks for pointing it out though that its already been suggested

Well if you have the DMR grease then sure use that. I used all of mine and filled it up with normal grease and that worked fine Hope you get the problem sorted.

I feel that i found the forum most useful when new members could post in the Beginners section. It gave them a chance to introduce themselves and ask any questions they needed, then the members would go and help and answer them in beginners chat until they were ready for validation once they proved they could act responsible on the forum. Beginners chat and trials chat are slowly becoming the same thing now, so would it be easier just to remove one of them and just make a trials chat section and have a Q&A section thread within the trials chat so it saves making a topic just to get a question answered? But if they are going to be merged then yeah i feel it would be useful to get a Q&A thread added in the section to save topics being posted just to get a question answered.

When this happened to mine, i just gave them a clean and regease and they worked fine again. But if your hearing a crunching noise then one of the bearings might have gone but as Rodreguez said, there easy enough to replace.