monkeyseemonkeydo Posted April 1, 2008 Report Share Posted April 1, 2008 But it really doesn't look like it would fit. Anybody think otherwise? I can always shave off some of the sides of the bottom piece......Was just gonna say: lathe = win. Quote Link to comment Share on other sites More sharing options...
psycholist Posted April 2, 2008 Report Share Posted April 2, 2008 (edited) The aluminium centre of the star nut in the urban fork has a 10.5mm outside diameter. The steerer is 18.3mm inside diameter. This leaves you 3.9mm around the star nut. Less than the 5mm needed to put a magura line through. The good news is if you file a chunk off the aluminium centre piece of the star nut there will be space. The problem is once you completely cut the steel star part of the nut it probably won't grip in a useful way on the inside of the steerer . Edited April 2, 2008 by psycholist Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.