Mike Winton. Posted December 29, 2008 Report Share Posted December 29, 2008 Any body used them yet? how have they held up? might order some for my bionic mod Quote Link to comment Share on other sites More sharing options...
Ben John-Hynes Posted December 29, 2008 Report Share Posted December 29, 2008 A mate of mine has a pair on his Zoo! stock, he's a basher () and they're holding up really well so far. They look mint too. Quote Link to comment Share on other sites More sharing options...
Shaun H Posted December 29, 2008 Report Share Posted December 29, 2008 A mate of mine has a pair on his Zoo! stock, he's a basher () and they're holding up really well so far. They look mint too.As of tonight flat spotted Quote Link to comment Share on other sites More sharing options...
odakyu Posted December 30, 2008 Report Share Posted December 30, 2008 Just an advice....NEVER use Try-All hubs on a bionic mod....they don't fit well....Try-All hubs are too big...u need alot for modification to get it fit nicely Quote Link to comment Share on other sites More sharing options...
Al_Fel Posted December 30, 2008 Report Share Posted December 30, 2008 Just an advice....NEVER use a bionic mod on Try-All hubs....they don't fit well....Bionic mods are not made very well...u need alot of modification to get it work nicelyAhh thats better. Quote Link to comment Share on other sites More sharing options...
Mat Smith! Posted December 30, 2008 Report Share Posted December 30, 2008 Just an advice....NEVER use Try-All hubsWheeyyyMat Quote Link to comment Share on other sites More sharing options...
odakyu Posted December 31, 2008 Report Share Posted December 31, 2008 Please allow me to clarify...Try-All hubs are very good....they absorb the impact better than most hubsThe problem is Try-All hubs don't really fit well with bionic frame...but monty and Viz hubs work fine with bionicI am not sure if bionic frames are made to be like this or they don't really care about measurements.... Quote Link to comment Share on other sites More sharing options...
streetjibs Posted December 31, 2008 Report Share Posted December 31, 2008 Please allow me to clarify...I am sure bionic don't really care about measurements.... Quote Link to comment Share on other sites More sharing options...
16 years later Posted December 31, 2008 Report Share Posted December 31, 2008 Any body used them yet? how have they held up? might order some for my bionic modYou could just cut the inner wall out of your current rim and carry on running that for a while, see how it holds up and then decide whether to get the try all hOle rims. Quote Link to comment Share on other sites More sharing options...
JonMack Posted January 1, 2009 Report Share Posted January 1, 2009 The problem is Try-All hubs don't really fit well with bionic frame...but monty and Viz hubs work fine with bionicI am not sure if bionic frames are made to be like this or they don't really care about measurements....Can't you just run the snail cams on the outside? Quote Link to comment Share on other sites More sharing options...
Mike Winton. Posted January 1, 2009 Author Report Share Posted January 1, 2009 Can't you just run the snail cams on the outside?Yes lol Quote Link to comment Share on other sites More sharing options...
odakyu Posted January 2, 2009 Report Share Posted January 2, 2009 (edited) of course i can run it outside but the thing is now the rotor is too near the frame! I can't even put the calipers in...now u can teach me what to do.... Edited January 2, 2009 by odakyu Quote Link to comment Share on other sites More sharing options...
Ali C Posted January 2, 2009 Report Share Posted January 2, 2009 put the disk side snail cam on the inside of the frame and the drive side on the outside? Quote Link to comment Share on other sites More sharing options...
G-baby158 Posted January 2, 2009 Report Share Posted January 2, 2009 put the disk side snail cam on the inside of the frame and the drive side on the outside?+1 Quote Link to comment Share on other sites More sharing options...
Rafal Posted January 2, 2009 Report Share Posted January 2, 2009 (edited) ive got new hOle rims about few weeks and works fine. My mate cut inner wall like other said from older one and it works fine on the rear wheel too. I did the same with my old rim and gave it to my friend to front wheel instead his f**kin heavy zhi rim.http://fotohub.pl/view/364fbfaaec695b2cc3249e73b578f41c47mm in front is awsome and lighter than standard try all front rim.this is his bikehttp://fotohub.pl/view/1d404d63d6f68bcd50cce680f92a2641 Edited January 2, 2009 by Rafal Quote Link to comment Share on other sites More sharing options...
odakyu Posted January 3, 2009 Report Share Posted January 3, 2009 put the disk side snail cam on the inside of the frame and the drive side on the outside?I tried it previously but it can't work...if there is no snail cam on the drive side, then the chain will be rubbing the frame.What i did was i put some spacers in between Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.