Wozzerwozzee Posted July 23, 2012 Report Share Posted July 23, 2012 (edited) Still got a problem with the front dic making a noise. The disc doen't look bent. If I twist the caliper turny thingy towards minus, it doesn't seem to make adifference. Please see attached you tube link http://youtu.be/bjpbtMLNYN8 Any ideas ? Thanks Warren Edited July 23, 2012 by Wozzerwozzee Quote Link to comment Share on other sites More sharing options...
Pete.M Posted July 23, 2012 Report Share Posted July 23, 2012 (edited) I think the bolt(s) holding the caliper on the brake mount is/are catching the disc. Edit: Or more likely the washer on the bolt is catching... Edited July 23, 2012 by Pete.M 1 Quote Link to comment Share on other sites More sharing options...
danrobinson Posted July 23, 2012 Report Share Posted July 23, 2012 i had a similar problem on my downhill bike do you have a adaptor on the brake? i had it were the bolts holding my disc on the hub were rubbing against my adaptor Quote Link to comment Share on other sites More sharing options...
Dan_Trials Posted July 23, 2012 Report Share Posted July 23, 2012 As has been said, could well be a mounting bolt, you can eliminate this problem by adding washers directly under the head of the bolt, there by shortening how much of the bolt shank protrudes out the other end. If it curse it, it will also give you an idea how much you need to remove from the bolt (measure the stack of washers). Quote Link to comment Share on other sites More sharing options...
Matthew_Gibson Posted July 23, 2012 Report Share Posted July 23, 2012 the rotor hitting the top of the calliper? Quote Link to comment Share on other sites More sharing options...
Wozzerwozzee Posted July 23, 2012 Author Report Share Posted July 23, 2012 Thanks guys, I'll have a look at your suggestions. Quote Link to comment Share on other sites More sharing options...
BradJohnson Posted July 23, 2012 Report Share Posted July 23, 2012 Sounds like this... the rotor hitting the top of the calliper? Quote Link to comment Share on other sites More sharing options...
jack1987 Posted July 24, 2012 Report Share Posted July 24, 2012 Mine was doing the same last night. Turned out to be a washer rubbing on the disc removed it and it was fine Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.