Tidy Posted April 20, 2019 Report Share Posted April 20, 2019 (edited) Hello all So i settled on disc front and maggie back for trials but hate levers not matching across the two brake systems. Here's my attempt at getting a bite point on trial zone same as my trialtech rim brake, used 12mm m2 bolt with 3 m2 spring washers and clamped an old chain plate to the lever and reused the original torx bolt with m2 nut to fill the plates other hole. Before i try it on a new system and ride can anyone think of any improvements? Edited April 20, 2019 by Tidy Quote Link to comment Share on other sites More sharing options...
Matt24. Posted May 9, 2019 Report Share Posted May 9, 2019 Seems like a good idea. Be interested to know how it works. I have a trialzone which I have taken off the bike as I like my bite point quite far out and it means the lever is further than my finger and have lost the lever a couple of times trying to grab it. This could be a solution! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.