stupot Posted October 7, 2005 Report Share Posted October 7, 2005 hi i have a pashley 26 mhz with a onza wide rear rim and a maxxis 2.5 rear tyre and magura hs33 brake i was wondering if anyone knew if a xtr carbon booster would clear my tyre and fit the frame mounts thanks Quote Link to comment Share on other sites More sharing options...
nafan Posted October 7, 2005 Report Share Posted October 7, 2005 Duno about the XT-R boosters mate sorry, perhaps try www.tartybikes.com and look at the echo ones... designed for wide tyres apparently... Good luck mate hope I helped :P Quote Link to comment Share on other sites More sharing options...
quick_spider Posted October 7, 2005 Report Share Posted October 7, 2005 The place where it wont clear if it doesn't is at the sides. This is roughly 8cm above the canti studs. Have a gander at your existing setup and see if the corners of the tyre are likely to clear that. Remember that the booster will be sitting further away from the existing magura booster which will give you more tyre clearance. I hope that makes sense - it's difficult to explain. Jon Quote Link to comment Share on other sites More sharing options...
stupot Posted October 7, 2005 Author Report Share Posted October 7, 2005 (edited) thanks jon i have a alloy salsa one at the mo and that clears at the place where you said by about 10 mm so i think it will fit have just seen a carbon booster on the salsa web site so i might one of them Edited October 7, 2005 by stupot Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.