flas12345

hi, i ride with a 18 tooth freewheel at the front and a 12 tooth fixed spocket at the back but with its the other way round. if i wa you i would put an 18 tooth freewheel at the back its the best gear ration i have ever riden and it feels ace.

hi, i am one of paulbell123's mates who has the plazmatic crm's on. i am running them on the back of my bike on a fairly deep grind and they work mint. i highlt reccomend these pads they are that good. my friend sam is running the koxx blocks brown on the front with only a light grind and he said they work good to. so i say plazmatic crm's on the back and koxx blocks on the front.

nice bike

i was watching you ride today and you was going fast at a wall then slowing down and then tried to backwheel the wall. but you need to keep at steady speed so your momentum stays with you when you pull up. i hope i helped you paul. but just keep practicing

it depends which pads you have got or if you get some tar and rub it round your rims they will work a treat, and it will be fine to put another grind on your rim

it depends which pads you have got or if you get some tar and rub it round your rims they will work a treat, and it will be fine to put another grind on your rim

he has a black mission prodigy and hes just got the standed onza stem

ye so do i mate i dont no what freeborn is either if i new i might be able to give you some advise

hi mate, no it isnt different for isis well the one that i have isnt anyway it fits my dmr witch is isis sooooooooo, try it mate it should work

hi, just go onto www.tartybikes.co.uk and look on 'bottom brackets' and look at the onza one and that will tell you. this is also what comes in the t-pros so if you wanted to you could but this one again its up to you

hi, ye mate i think this would look good go for it

hi people, i am just wondering if the leeds ride was anygood today and if i missed anything good. sadly for me i could not make it tell me everything you can cheers louis

hi, i bleed my maguras myself i find it easy. i take all my brake off my bike, take the pads off also. i then fill my sink up full to the top with water then i add a bit of anti-freeze as i bleed them with water and anti-freeze. i then unscrew the 2mm allen key bolt in the lever and the 5mm allen key bolt on the piston itself. i then get all my equitment which is a seringe and a hose with a magura barb in it. i then fill the seringe with my water and anti-freeze mix making sure there are no air bubbles in the seringe. now i make sure my brake is fully under the water i have to this to make sure no air gets in the brake. then i screw my hose into the lever with the hose attached to the seringe. now i insert all the water and anti-freeze into te brake whilst pumping my lever at the same time. i do this twice to make sure there is enough in the brake. then still making sure the brake is fully under the water, unscrew the hose out of the lever and screw the 2mm allen key bolt back into the lever. i then screw the 5mm allen key bolt back into the piston whilst the brake is stil under the water. now you have a fully re-bled brake i have done this many of times on my bike and my friends bike and it works a treat hope this helps you mate

hi, it does not matter which way you go it will still be a grind, aslong as you make a good job of it.

hi, i have a crank extractor to get my cranks off it is easy. they cost about £8 from your local bike shop, i would get one it is much easier

aup, i would go for the echo lites, my mate has them and they feel realy good when on back wheel. echo's

hi, i am riding with onza shin digs they are awesome for grip and i ride street alot and i like them very much so onza shin digs mate

hi mate, i would get a blue rim to match your hub and then get black spokes it will look very good i think. i no a lad who i have rode with and he had blue rims and hub also there are i few pictures in the pictures forum which have blue rims with blue hub it looks rather nice i think

aup mate, well seen as you have a zoo it will lokk good with the zoo riser bars. i have these bars and they are realy good i love them even no i do not have a zoo python put they are mint. i also have the try-all stem 31.8mm rise and its a beast

aup pal, there is no way i would have a v-brake on my trials bike, magura hs33 are the best for the back wheel you can not go wrong with them at all. so basicly get another magura mate it will work wunders for you

hi mate, the best part on my bike i think is my new try-all freewheel it is awesome. i have bought for my bike: , zoo riser bars (gold) £35try-all stem(31.8mm) £35onza-shin dig pedals-£16.99plazmatic pads-£14.99try-all 108.9 freewheel-£50in the future i am going to buy plenty more things to upgrade my t-pro eventualy it will look awesome

i have now got my try-all freewheel people, it is awesome it has not yet skipped or anything. they are great i would reccomend them to anyone

hiya people, after cristmas i am thinking of getting a gu lever for my hs 33 both levers like for front and rear. can you tell me if they are anygood thanks lou

hi, the 07 t-comp is mint and great for value with maggies and freewheel, where as the o7 t-pro if perfectic. i would not buy the 07 t-pro no way not with the vee brakes. i would go for the t-comp mate all the way

aup pal, i quite like avid but thats just my opinion but like everyone esle has said put them both on and see which one peforms the best then you will no