flas12345

gu typoon they are just the sex

hi mate. this is how i bleed my brakes and they are mint. all you need is a seringe and a crossover pipe with a barb in one end. fill sink with waterput all my brake under the waterun-do the the little 3mm allen key bolt in the lever(making sure the brake is still under the water)un-do the 5mm allen key on the piston(again making sure the brake is under the water)fill seringe with waterput crossover pipe onto seringescrew bard in to the 2mm hole in the leverinsert the water into the brake whilst pumping the lever (do this 2-3 times to make sure)unscrew barb out of 2mm hle in the leverscrew 2mm and 5mm bolts back inAND YOU ARE DONEmake sure when you are doing all this, that the brake is under the water. hope i have helped you mate.

wow. you realy did get a great birthday. you couldnt have wished for a better one than that. nice one mate. happy birthday!

i would say that you either have not put enough water in it or you might have got air trapped in it. i would suggst re-bleeding it but make sure yu do put enough water in and try not to get any air in to the brake. cheer lou.

there you go then mate. bobs your uncle

yeah i do, but this way i can be sure that my brake is going to hold. i dont want to be bum holing myself.

i am running plazmatic crm's on front and rear, on a medium grind, and they work amazing. Do a search on pads because there are loads of topics about this and just look at all the reviews on different pads and see what suits you, but plazmatics are amazing mate.

hi mate. i have bled my brakes with water and anti-freeze but mine nearly froze tonight so bleed your braks with water and anti-freeze but put quite alot in it then you will be ok. cheers lou.

this is the third topic on this. what is te point in posting same thing three times, just use the first one.

if the brake is second hand, then its propably worth about £60-£70 maximum. my mate had one and he only got £50 for it on ebay and it was in mint conditon, and i am sorry but i dont no what the song is at all. cheers lou.

about 6 months ago, one of my mates had front and rear on his jump bike and they were awsome. i dont think i would use it on a trials bike though, they are to big. if you have another bike then put it on that it should be amazing.

i had a problem like this on the first day i got my trials bike, but all i did was got a mallet and a piece of copper pipe and tapped it down the forks making sure that it went it straight. i tapped it down further than i actually needed it then i put the pipe in the forks from the bottom and tapped it back up to where i neded it, this way it helps the star nut to grip to the forks. since i did this i have not had another problem with it yet. hope i have helped you. cheers louis.

aup paddy. that is a very nice sidehop mate. i cant wait until the day comes when i do that.

i would say the onza shin digs mate. they are awsome for grip and for the money.

hi mate. i had two hope disk brakes and they needed a bleed once and this is how i did it, take the top cap off near the leverinscrew the bolt that is in the caliperfill a seringe up with which ever oil the brake takes(in my case it was dot 5)insert the seringe into the caliperinsert all the oil into the caliper and whilst doing this pump the leverthen when all oil is through the brake and there are no bubbles put top cap back on and screw bolt back into the caliperhope i have helped you mate and good look with your brake.

hi i use just one finger which is my index finger. i feel although i have more control over the bike this way. most people i have seen use this method aswell.

hi guys. me and all my mates are going on either the 10 or 11 o clock train. this is going to be a good one.

aup paddy. you finally got your bike done then. i must say that looks well nice. cant wait to see it this weekend.

the old people where i live are a pain, they are always moaning at us for riding, but to be honest the police are fine. when we are riding at night at weekends andthey are walking round the town, they often stop and watch us riding, they think its amazing how we do all the tricks. there are 5 of us in retford that ride and not one of us has been done or had a fine yet. cheers lou

aup mate, what you wanting to swap your python for?

here is my onza-tpro 06 model. i bought this bike in august 2006 so i have been riding now for almost 6 months and as you can see i purchased gold zoo bars, so if you could, could you please do the rims, hubs, cranks, brake mounts, and the levers in gold. it will probably look silly but i just wanted to no what it would look like. thanks very much lou

the frame looks mint in black but i dont like the bars. there is someone in the new members chat who has already posted something the same as this but he is doing it for other uses aswell. cheers lou.

hi if you go onto tarty and click on bikes 20" and go onto the t-comp, then everyting you need to know is on there hope i have helped cheers lou

grap my balls

why dont you want to use water its amazing. the brake feels so much smoother and the lever springs back instantly, but i supose you could just do the same method as above but with the magura fluid.