flas12345

hi mate. i have got a dmr and i have single speed on that and i also have a dmr tension seeker and it keeps the chain nice and tight and you can have it how ever you want.

iv got a amourdillo, i have had it for about 6 onths and frame is still strong as ever. i think your mates are telling you a load of rubish. i found a amourdillo on airevalleycycles and i rang them up and they said they didnt have any in stock but they gave me a number for another bike shop and he still had loads left, i cant remember what the bike shop was but airevalleycycles should tell you give them a call.

if you are only selling the frame, you wont get no more than around £80-£100 for it. you will get the top end for it if it is in good condition. one of my mates if after getting a new frame, he has a t-pro at the minute and he cant no more than £60 for it.

hi zoo pads on a grind are good but they do were down pretty quick. i have a deep grind and i am running plazmatic crm's and it is a mint set up, i am not running any tar. i think when my grind weres down a bit i think i will have to use a little bit of tar though. its up to you mate what you do.

hi mate. i would never get anything off them again, i ordered some pads off them the postage was rubish they took 6 days to come. if i were going to get anything for my bike i would go to www.tartybikes.co.uk, these are by far the best trials bike shop around.

i would not do that mate, not at all. i had two hopes and i bled them with dot 5 oil with a seringe and that was it and they worked fine.

after posting this mate you will not become a member again, well not yet anyway

aup i am running a try-all freewheel and is has not skipped once yet, its amazing i love it, it works a treat.

id go for a 12 tooth, i am running 18-12 and its really good, i like it very much.

do a search mate, this topic comes up all the time hope iv helped

plazmatics mate they are awesome. work mint and they have never let me down.

hi it is his last video of him riding zoo pitbull, but is last ever video because he is moving to adamant so the next one should be good, hopefully

nice one mate, you have made a good job of that, looks well made and looks like it works good too. looks a bit heavy though (dont no if it is or not). well done.

if you are only just going to start trials i would get the t-rex because you can learn everything on that and abuse it then you can get a better bike in the future when you are realy good. theres no point in getting realy good parts and having a mint bike if you are only just starting because you will just reck it and im sure you want to do that. go for the t-rex mate hope iv helped.

hi i find grips hard to get on and off until i used a bit of lynx deoderant, its works mint it slides on like a dream. try it mate it works.

hi make sure that your chain is inline with the front kog because if it is not, this is what could be causing it or it maybe that your chain is to slack and needs a link taking out, or also it could be that you gearing is not set up properly therefore you need to set them up. hope iv helped.

hi i would go for marzocchi forks, either the dirt jumper 1's, dirt jumper 2's or the dirt jumper 3's. my mate runs the dirt jumper 1's and there amazing and my uncle runs the dirt jumper 3's and they are amazing too so it doesnt realy matter which you go for they will all perform good.

hi i have rode a python, it is a lads from wheatley( a villiage near me ) and think it is mint to ride. if it had a bashplate i would get one but it doesnt. i like them very much.

aup yeah one of those will fit but just make sure that there is the same number of spoke holes as the one on your 20 inch hub.

aup paulbell123 i think your rim jams are quite good to say your mate give you them but i am running plazmatic crm's and they mint

hi, i ride a 06 onza t-pro and ithink it is a beast. i am nearly 6foot tall and i have been riding just 5 months and i getting the hang of things now but i will get there.

hi i have i grind on both ,y rims and all you need is an angle grinder but you have to make sure that you have a 'metal cutting disk' in the grinder and i grinded away from my brake at about a 45 degree angle. this will give you a fairly deep grind though so just grind it to how you want it. also i would get a new set of pads for the maguras too. i am running plazmatic crm's on the back and they work mint with the grind that i have. i am not running no tar on the rim at the minute either. hope iv helped you mate.

hi all i am just wondering how high you can side hop? i am only just learning how to side hop realy so if you want you could leave a few tips aswell cheers lou.

hi it may be that your pads have just not beded in yet or it could also be that your brakes need bleeding hope i have helped

aup paulbell123 if i come out tomorrow i will show you how to do it and the right techique mate