My way to bleed brakes is to undo the system at the lever end and thread in a pice of maggi tubing, it will screw right in no pobs. Put the other end in a bucket of water and then undo the sytem at slave end then place your finger over the end of the pipe thats submerged in the bucket of water and press lever (if you have oil in your brakes you will wanna thread some pipe in slave end and feed this into a bottle as you will have oil on your rim with this method) keep lever pressed in and release finger release lever and then repeat finger on press lever, until you have passed loads of water through your system. keep the pipe in the lever and under water in bucket end then close sytem at slave end then (assuming you have you bike in an upright position with lever higher than slave) close sytem at lever end. You will have some of the best bleed brakes in town and a lot easier, quiker and better that taking off all you maggies and putting them in the bath.