missionmod

I think im loseing my interest in trials but i dont wont to. seem stupid i know but i just latly dont wont to go out on my bike . some one help me please in what to do. liam ( not shure how you can ,just remind me how good trials is!!!!)

Zoo! green pads are good m8 ment for a none ground rim so should run well liam

Nothing to bad. As you said sprain and pains, but worst had to be kick hop to face basikly lol I was trying to gap from ledge to legde and as i pushed my front wheel forward, it hit the front on the wall and i jsut went over the bars and had no time to put my arms down so just smahed me face on the top of the wall. didnt hurt to much but next day was bad lol. liam

You need to get a "easy out " drill a hole thought the bolt. Then screw the easy out in to the hole,make shure it is lubricated and spray wd40 on hole and then once the easy out is tight as possibal,it should start to turn the brooken bolt out of the taping. if that hard to under stand im sorry as that is what my dad told me. liam

At the mo moment i dont have car .lol but i will being geting a saxo hopefully a vtr (i wish at my age ) but il be runing 15 as its a little car and i dont have the time or money to start pullin the arches out and all that. jsut that i hurd droping the car 40mm all round has the best handerling. liam

cool m8 just wonderd. Had any troubles of rubing the arches at all? when i get my car im lowering it 40mm all round on spraxx (think that what they called ) al round. liam

Was a really good video m8 and you should be prowed the video was edit rather well. keep it up and your be geting rather good my freind. liam

Yours cars proper slamed boy!!. How much you got it lowered .and mines www.myspace.com/pimpmycow liam

Also a good point is to wind you tpa out all the way down. before you remove the bolts so when once you bleed your brake there is more fluid in the cables and pistons. So when you wind it out to the requird amount you have more fluid so you brake should feel more sharper and have more pressure as its apliled. hope this helped a bit more ? ( sorry for some of the spelling mistakes) liam

Mrknoxx il probily be there not to shure though. but if i am see you at 11 at guildhall il bring some m8s as well hopefully. liam (mission stiped to metal)

I would say stick with a magie. they prower full, if your side hoping you not as likely to smash it. Like with a disk you have the changes of bending it. Also you have a lot of stress on the forks with a disk. My opioion would be stick with a magie liam

Thanks boys. still not shure what frame to get, but thanks for the idea of the monts for got a bout them but i still thinking about the zona zip. but supercyces are so shit. there delivard is discraful, anywere else i can get it ?? liam

Is this pic of dan walker?? may be some one esle but just wonderd? liam

Cool sounds good m8. yer il probily pop down. i was on the shit mission prodigy stiped down to metal. had a tight jeans and a brown top on lol i think i rember seein you ,i was rideing with the boy with the old t-mag ? liam

thnks m8 well it eather on of them frames or a zona, im not shure how much money i got at the mo though so were see lol . liam

Some one most no plzzzzz its a echo rim o6 if that helps ? liam

Basikly what it say in the title. I was wondering if you can run a 48mm on eather frame with a hs33 with rock pads ?. As im thinking about buying a monty frame, i have a wheel at home with a 48mm rim. so i dont wont to buy it with and that not able to fit. thnks liam (dj ride was great)

Today was a good ride. Apart from the weather not being on are side, it didnt stop people. Some good rideing took place and all in all a good days ride to rember dj.

Thanks to the only person who tryed to help. and thanks to the people who reminded me i spelt measurements( still not shure if that right) was wrong sorry. liam

Rain or shine im going still going to ride. Just filling you in guys. liam

I ride with these and they are really nice. They pritty light, rather strong, but the only thing is i hurd about people riping the therd out of the pedal arm. liam

Have you put the tpa in all the way ?? and what he doesnt say is you need to put the bolts back in the calliper and leaver when the brake is still under water as air all get in the brake. Thats what usealy make the brake spungey. liam

I find the leaver in the 05 ones are more comfyer, and look beter as the tpa is in a safer place. liam

Harry i do your brakes not you lol Anyway what are you using to bleed you brake ?? If your useing water. This is the way iv all ways done it. Works fine. liam

Thats really confussion. I jsut dont under stand how it works ? liam