ScottTrials

bump

Wear a helmet and vid every single time you ride it so that when it does go you and all of us can have a good laugh. Make sure it snaps though. Known of the phony crap. Also ride it abit after its dead see what it can handle. Good luck killing yourself or have fun in hospital Scott

ONZA 1. its lighter 2. its cheaper 3. its just plain and simply better. all thats my opinion.

Thats what I was thinking as these are the cranks that some of tarty are using. If I am correct. So if I go for what I said by getting new cranks and a tensile ffw and a trialtech half-bash. Also could some tell me if this would give me enough clearance on a try-all 127.5mm bb. Aparently not as it has 'oversized threads' 1.375 x 24 tpi thread compared to the cranks that have 1.37 x 24 tpi threads.

bump

I started off with a 5mm and that was too big so I had to remove it and put a 3mm on instead.

nothing to do with the axle bit the threads the sprocket/freewheel screw onto.

Cool and what's you set up around that area?

I will see what I'm aloud up to as I'm still paying my frame off, trying to stay away from deng to be honest. And not wanting to spend a bomb on cranks as like I said I'm still paying off my frame.

Hi there, I was extremely pleased with these cranks but due to not having my bike set-up correctly I had to keep removing the freewheel to put spacers on so that it would not rub on my frame. So ended up heating the centre bit to expanded it to get it off and I think this cracked some of the threads on the cranks. I then went to gap to a curb on the way home from work and ended up on the floor, I origionly thought that it had skipped but then tried to pedal and it just kept spinning. I was using these cranks with a 3mm spacer from tarty and an ENO. Was thinking of getting a new pair of these as they feel really stiff compared to when I had my tensiles on my pitbull. With a bashring and a new freewheel. Then sell the ENO. Any help/advice is highly appreciated. Thanks Scott.

From my experience with my ENO, trialtech cranks and try-all isis 128.5mm on my limey with a small spacer I only get a small amount of space left so I would say no.

Must be able to type and all that then. This is now over 2 months and it's annoying as I wouldn't even think of doing this to another rider as I don't know how bad they might need it. I needed it then and still do as I'm still using my friends spare hose and cross-over as he is currently out of trials as he snapped his frame and is saving up for a new one. So he's going to be wanting his brake back soon. Edit: forgot to type the n't bit on wouldn't. woops

Just a little bit more info: they don't make them anymore, which is anoying as they were a great product to be honest. Trials-man used to sell them, he is/was an ad in the top right.

Take it you used the computer to design it and the printer thing to cut it out as I did a similar thing for a box I made when I was at royal manor and then used another one at weymouth college.

107.67g scotland.

This is bloody annoying now and the tw*t should be banned or if one of his friends can help. I either want my part or money, either way I would like something done about this.

before you do any of that crap, is your crank, freewheel rubbing on the bb shell. I found out when I had this problem that I needed a longer bb axle.

should do. but I dont no I never used it with a booster. I only ever had problems with my freewheel and bottom bracket as I had no money so I kept buying Shimano crap through ebay. Never again do I buy shimano for trials, snapped the bb, wrecked the pawls inside the freewheel so that it was basically a freecoaster freewheel as it only ever seemed to work when I did pedal hops. After 2 days of that it completely went.

cool see you then.

TNN LGM's, you won't be let down by there hold and noise. Re-grind your rim and make sure they are set up square to the rim.

on the one in my shed it has a echo/old try-all rim on and its pretty damn wide and it's still got about 1cm gap either side when the slave's are all the way out.

Anyone else.

Bump Up My Post

its a t-mag as I've got one sat in my shed.

Hi there I took my bottom bracket of today to take my bearings off and noticed that my axle has gone aswell so I am going to get a new BB. I was running a try-all 127.5 and as thats gone. I was wondering what one to go for? Many thanks Scott