quick_spider

It looks like Tom's been editing seeing as new to trials can't read the guidelines...

If you sit the exam then you might have to pay for the resit if/when you do take the exam as the exam board will have grounds for charging you for this exam (assuming you go) Tell the school that you're not doing the exam.

The hub needs to be attached to wheel so they can sort it out so don't unbuild the wheel!

Auto-Mod For Sale/Wanted topics are no longer allowed in New Members Chat. If you wish to post a For Sale/Wanted topic on Trials-Forum you need to read and follow this - http://www.trials-forum.co.uk/forum/index....ounce&f=13&id=3 Topic Closed.

Why do you post useless replies like this? Stop posting shit in NMC. There's more than enough in there without you making things worse. Welcome to the forum Damien

No. You just need the hardware.

Why are you asking now? It wont charge it to the proper voltage and chances are you'll probably never will be able to again. You normally charge batteries at a higher voltage than they output. Jon

Might be worth listing the model numbers of the kit you got. Jon

If nothing appears after clicking the refresh network list button then i'm pretty much stumped Sorry Jon

Do either of the above look like anything you've got? Double click on your wireless network and it should all work.

Looks all okay. I'd go to add/remove programs and uninstall the netgear utility. After you've done that you should get bubbles coming up on screen telling you things like Windows has found a wireless network, would you like to connect? Jon

It can see there's a network there, but you need to tell it to use it. click on the 'Netgear' under the SSID heading click the connect button in the bottom corner see if anything happens... Jon

Click on the signal that appears and click the connect button. There'll probably be somewhere on the settings tab to save the settings. If that fails, uninstall the wireless assistant and let windows manage the settings... Jon

I've had good enough results with a stone grinding disc at about a 45 degree angle. My angle grinder only goes one speed. I did the grind and it was good enough when I tested so I didn't muck about any more Make sure you've got some eye protection first. Jon

Not in this thread. Keep it on topic.

I think this thread has reached its inevitable conclusion.

You were completely innocent? or was it by any chance you were posting lots of shite too? I don't have anyone in my ignore list. When I did, I always ended up clicking on the unhide their post button to see what they'd written. Damn curiosity... Jon

Email or Phone him.

I'm sure posting on here is the best way to get in contact with him

Auto Reply The topic starter has been validated. Moving topic from New Members Chat to Trials Chat.

Does the crank you have got have a square shaped hole in it?

Auto-Mod Unintelligible/For Sale/Wanted topics are no longer allowed in New Members Chat. If you wish to post a For Sale/Wanted topic on Trials-Forum you need to read and follow this - http://www.trials-forum.co.uk/forum/index....ounce&f=13&id=3 Topic Closed.

I'd try duct tape to be honest. Having run RB levers which you can't have the clamp very tight anyway, they don't need to be held too fimly in place. Jon

Auto-Mod For Sale/Wanted topics are no longer allowed in New Members Chat. If you wish to post a For Sale/Wanted topic on Trials-Forum you need to read and follow this - http://www.trials-forum.co.uk/forum/index....ounce&f=13&id=3 Topic Closed.

I would've liked to watch the football, but I have food poisoning at was in hospital on a drip. Hardly the most exciting afternoon! I'll probably watch some of the other games. Jon