czarbikes Posted May 26, 2008 Report Share Posted May 26, 2008 I want a rear free disc hub were can i get one from please jamie Quote Link to comment Share on other sites More sharing options...
JoeM Posted May 26, 2008 Report Share Posted May 26, 2008 (edited) Chris king ISO is your only option buddy. Edit: I stand corrected. See below. Edited May 26, 2008 by Joeee Quote Link to comment Share on other sites More sharing options...
Callum-Luvs-Trials Posted May 26, 2008 Report Share Posted May 26, 2008 (edited) I want a rear free disc hub were can i get one from please jamie We will tell you, Only on one condition? ........ You dont post a picture of it when you get it? Edited May 26, 2008 by Callum-Luvs-Trials Quote Link to comment Share on other sites More sharing options...
David20 Posted May 26, 2008 Report Share Posted May 26, 2008 Chris king ISO is your only option buddy. No it's not. My LBS have got disc profile's in for a few riders. http://www.highlandbikes.com Quote Link to comment Share on other sites More sharing options...
monkeyseemonkeydo Posted May 26, 2008 Report Share Posted May 26, 2008 Chris king ISO is your only option buddy. Not true (click me). I expect TartyBikes would be able to get hold of one of these for you if you ask nicely . Quote Link to comment Share on other sites More sharing options...
JoeM Posted May 26, 2008 Report Share Posted May 26, 2008 (edited) Dude, stop being a cock. ^ (That callum guy) You could modify a MTB profile hub, but I'm not sure that you'd want to do that. Although, I have seen a Mod running a Disc Profile, that might of been modified, I don't know. Edited May 26, 2008 by Joeee Quote Link to comment Share on other sites More sharing options...
*Tom* Posted May 26, 2008 Report Share Posted May 26, 2008 Did you not read the posts above yours?.. You don't need to modify a hub, profile make 110mm Disc hubs. Quote Link to comment Share on other sites More sharing options...
JoeM Posted May 26, 2008 Report Share Posted May 26, 2008 Did you not read the posts above yours?.. You don't need to modify a hub, profile make 110mm Disc hubs. Yes, after I had pressed post. Quote Link to comment Share on other sites More sharing options...
eskimo Posted May 27, 2008 Report Share Posted May 27, 2008 You can wait 'cause of your broken shoulder, so just order it direct from Profile. Quote Link to comment Share on other sites More sharing options...
bollo you ball-bag Posted May 27, 2008 Report Share Posted May 27, 2008 You can wait 'cause of your broken shoulder, so just order it direct from Profile. just to rub it in lol bless him Quote Link to comment Share on other sites More sharing options...
eskimo Posted May 27, 2008 Report Share Posted May 27, 2008 just to rub it in lol bless him I wasn't rubbing it in. It'll be worse if he's got the hub sat there waiting to be rode while he's recovering than waiting for it to come. Quote Link to comment Share on other sites More sharing options...
PaRtZ Posted May 27, 2008 Report Share Posted May 27, 2008 (edited) Jamie You can't buy profile 20" disc hubs in the same way you can a normal profile hub. As said above, you need to buy the internals of a 20" hub and then fit the MTB disc shell around the outside (may need a bit of filing) If you see a site that sells "disc profile rear hubs" CHECK THEY AREN'T 135mm! If you manage to make one though, it'll be worth it, and it'll sell for loads on here too as I know lots of people, including me, are after one Edited May 27, 2008 by PaRtZ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.