GyTrials

There is two different types, the one he built there had the channels at the bottom, the newer one has the holes in the sides so needs to be wicked differently

It's the coils that come with the subtank, not sure on the size I'm about to order some either 24/26 kanthal but unsure which to go for

All plugged up fine wicked fine at first up to 18w then mother of all dry hits lol going to try and build the older deck up and see if that's any better

Re wicked look any better?

Which way round do you have your coil? Above post or below. I removed some cotton and have tried to do it as straight as possible but still can't go above 18w with 50/50 liquid going to try and clean up the coil as suggested and use new cotton

This has the new rba doesn't have the channels it has the holes in the side similar to the stock coils. When I built it I dry fired and used tweezers on the coil until it was hearing evenly, maybe I have compressed the coil too much? I will re wick again tonight and rotate the spring so it doesn't sit above the posts

Seems to carry on powering for a split second after I let go of the button also (istick 50w)

I have had a go at building my subtank rba deck today, coil is the one that comes supplied and reads at 0.5 ohm. However I can't seem to use it at more than 18w vapour is really hot and I'm getting dry hits from anything above 4 second draw, anyone know why this is happening? With the 0.5ohm occ coils I can use it at 25w easily without it getting warm in the slightest. any help would be appreciated

Still lives in cleethorpes but certainly isn't 12 anymore

Billy started riding again has lost all his log in details, he's posted this on the newbie section thought I would put it in here If any admin on here could you send him a message about his old account

There is a few of us that are from grimsby mate

One of the best videos I've seen in a long time

No one I know has heard anything about it being stolen, hull, gy, Louth etc Seems to be too good a price to turn down

Have you got a pic of it?

Just hard trying to find one lol, I have an old xlite rim that looks similar to that

Anyone got a suggestion for a rim around 35 mm?

Will a koxx/ try all rear rim fit in the back of an inspired hex ? Will the brakes still fit

Do you find the gearing easy enough to do trials moves as well as street type tricks?

What gearing are you using on this?

Could ride mablethorpe if you want

What about riding keirdon trials park?

Anyone still up for this?

Good video mate, looks like a good place to ride

Always a group of us riding there most weekends

Few of us riding hull tomorrow if anyone's up for it