Alex-Mitchinson

When scofield was walking down the corridor of the prison in the last ep, did anyone notice Bellick lying on the floor all beat-up? I had to rewind it. Definitalely going to be a 3rd series..... mahone + schofield = clever b*stards. They will find a way to escape.

ooooo I guess there are quite a few then...... PS - www.tv-links.co.uk is the best place to download tv series'. I noticed loads of people couldn't find good sites to watch from, when I was finally good enough to use the search

WOOOHOOOO I finished it.... I may have been lucky though as mine never dropped down to 30% or wateva. Gr8 game. Need more levels......... PS You dont need a hook for anything, everything can be done using: E,C,S and D

Julliette = Sly bitch

How many of you watch it? Not nearly as good as Lost but definitely deserves a topic..........

Yeh I have already done that but cheers anyway, Just that I'm fed up using crap sqr taper BB's. Thanks for the replies.

Currently running spr taper

I got quite a BIG SPOILER about the end of lost. I read it on some lost forum ages ago, dont have a clue if it's true or not....... It's kind of annoying actually and don't have a go at me when you hear it and think it's complete b**locks Don't want to put it in a post because I guarantee people will moan. PM me if you want to hear it.

"oh no did someone steal your seat?" No, it got lost in the post so I got fed up and decided not to use one anymore, f**king royal mail.

I have an onza t-pro with an oversized BB shell. The width is 73mm. Will a truvativ gigapipe fit? On tarty it says it will fit 73mm if you take the spacers off, does this include oversized frames? It is the only BB i have found with a 73mm width and at least a 124.5 axle. Urgently need to know...... Cheers.

I have a t-pro with an oversized BB shell. They're so annoying, the BB that came with my frame is oversized and fits perfect but is 119 length which is too short to run a front f/w (i rekon). I tried to find a longer axled oversized BB but couldn't. I ended up using my original oversized cups with a spare 127.5 axel I had. I think it's only a certain batch of 05 t-pro's which have this. About the thread stripping thing, it's definitely the bike shops fault, although there are not many frames which take different sized BB's they should still have checked it was the correct one to fit that specific frame.

I have a t-pro either an 05 or 06. They have an oversized BB shell. So you can only use an oversized BB. I tried to get one from tarty and supercycles but they don't sell them anymore. You have to either use oversized cups from an oversized BB or try and find one somewhere (possibly ring up onza) Also, im pretty sure they only come in 119 length axle square taper. If you use a non-oversized BB it will not tighten up properly. The length is 73mm as opposed to a normal BB which is about 63mm (i think)

Any of the deng boosters work fine..... it's just personal preference. I use a GU booster simply because I prefer the look of it.

I think thats what it is, have been running lower pressures recently. Yeh i might give that a go, where did you get that tube from? Cheers for the reply Already got electrical tape and the rubber tape which comes standard, but i suppose another layer of tape wouldn't hurt. Cheers.

I have had 4 punctures within the last 2 days, they have all been on the inner part of the inner tube and quite near each other, very small holes and therefore slow punctures. Would probably not put this down to bad luck or karma. Have cleaned inside of rim, rim tape, tube (inc new tube), and tyre. Any suggestions please? Alex.

Never knew you could swap BB axels over. All sorted now, cheers for the help! Alex.

BUMP

Yeh I looked on their site and found nothing so I assumed they don't sell them. Will definately give them a call!! Thanks for help, Alex.

Oasis and The Stone roses all the way! oasis - roll with it stone roses - love spreads Best songs ever.

Anyone know where I can find an over sized Onza BB?? (which will fit a t-pro) Must have a 127.5mm axle or there abouts Have tried supercycles and tarty but no luck. Help would be appreciated!! Alex.

I spent ages trying to get my f/w off, but in the end I finally found a good technique (well, it worked for me) - Lock the f/w tool in the vice - Put a cloth around the crank - Put the f/w on top of the tool - Get someone to stand on the crank (on top of vice) - Try to find a long scaffolding pole to fit on crank which will increase leverage - And then just either push or pull. I was told this technique by my dad's mate who is a bike mechanic so there may be a good chance of it working! Good luck! Alex.

Great vid Editing was nicely done and the ending was different but very good!! Nice one. Alex.

Yeh h/s is still 'as new' I will call tomorrow to sort it all out. Cheers, Alex.

Yeh cheers I looked at both of those. I think I am going to get this http://www.tartybikes.co.uk/product.php?id=2097 Since my ZOO one was £45 and the monty one is £43 i will just send back the ZOO and ask them to send me the monty one free postage (hopefully) All of you have helped loads, thanks! Alex.

Cheers for the reply Oh well, looks like my lovely blue h/s is on it's way back to tarty!! Any suggestions for an INTERNAL h/s? (under £30) Was thinking maybe FSA or cane creek? Thanks a lot for the help. Alex