i think you would have done it a couple of times but you had the pallets/creates in the middle if you didnt have them i think you would do it.. it would push you further too do it beacuse you will not want too fall off (Y)
people who say maguras are c**p on the front/back. they arn't there good, it's just you lot must really not have a good set up. i.e. pads you need good pads and a good bleed to get them too work good. just people can't admit that there most probably the best brake out there for trials. just needed to get that out. end of
:turned: :P :P
if it dosen't come of with t-cut or paint strippers use some 600 wet and dry.. or start with 650 wet and dry then if it still dont come off best bet would be too spray them and if you wet and dry them it will be fine for spraying.. don't forgetto use primer first then couple of layers of top coat, use very fine wet and dry again over the top coat (colour) t-cut it.. then a couple of coats of lacquer.. jobs a good'un
hope this helps
marc :P :P :turned:
(Y) my mates got one of these echo rims he has had it for like 5 months had it on his bike once and not used it since looks good but some of the things ive heard are saying there not as good as people say.. i think my mate is putting his on one day this week :( about time..
and if all them dont work look to see if your frame is flexing like fook.. have you got a booster on it??
my magura is s**t hot on the front.. there good if you set them up good and have a good bleed and pads..