wayneone

Well not EXACTLY so to speak but i like all the streety stuff, I ride a few rocks near me(the ones they put down so pikeys cant drive onto feilds)But there not what i would call proper natural.

Hope mono/xc there well good, hopes customer service cant be beat either. www.tartybikes.co.uk <-- Best place to get them.

Lovin' that (N) . I ride the exact same as you(well i plan to when i master it all) I ride the new mad 05 but im 5,10 so might not be best suited for you.

I have the exact same problem, just grease it up and tighten it up will you hands go white.

Steve where you from i need a riding buddy so so bad (Y) Im from Luton in Bedfordshire.

Detective's Mark and Wayne on the case. :)

FLATOUTSYLE are you ALLORNOWT? Your typing style matches perfectly, and your questions were both the same about the new bikes and how you ride a short bike you think is perhaps a bit too small. Just enquiring(sp?).

Ive have a encounter like this, what we had to do was take a long spanner to it, when we hoofed the spanner with a hammer untill it came loose, took some doing but it worked. Also a rule of thumb of undoing cranks to do them up turn them towards the front wheel.

sounds like a sticky piston. It might not work but id take it off the bike, Then take the pad out and squeeze the lever now clean the exposed part and then re-lube it use some thin oil.

Go to a site like photobucket.com make a account. Then upload your image from your hard drive. Then come on here theres a picture of a tree click on that and paste the url of the picture in there and heypresto. (Y)

Was i telling people how to pronounce magura? No i was quoting somthing i read that made me laugh like most other people do on here with there msn convo's. Except i dont use msn so i have no convo's to quote.

Mine did this, what i did in the end was take it all off again take a bolt and screw it into the frame without the mounts then offered the mounts upto it to make sure they wernt too long, Then i re set up making sure the plastic washer was in the right place(the break pointing down inbetween both mounts) and went from there.

Thats a realy good idea. Id buy one forsure if it was light enough, I hate it when mechs get bashed. (Y)

Im currently a smooth rimmer :P Ive got Zoo! pads on the back they work brilliantly and heatsink blues on the front also work ace! As for grinds cant speak from experience but from what ive gained from the forum best pads for grinds are Koxx bloxx Browns, greens and blues, or plazmatic crm.

Get yourself down to the magura cult website where i got that quote from! Its Mag-oo-ra trust me! :P :-

Yeah i have the oldest of the old skool levers, :P Is there a ajustment?

I never take my hands off the bars i allways seem to cling on for dear life!

:P :- My levers dont look like that. They look like this---> Ive checked the whole lever body, and cant find anything perhaps they dont have reach ajustment?

Mate let us know how you get on, if you find some let us know i sure would like to get some pimpy tpa's. Oh yeah are you after 04 ones or 05 ones?

Whack a zip tie on there mate, Problem solved. (Y)

My scheme is red, silver black. Silver frame and forks, red hubs, qr's ect, black drilled rims with red rim tape.

Theres no grub screw on the 04 ones(well not that i can see not even a hole for one that might have fallen out) Sure your not thinking of the new 05 ones?

Where is the reach ajustment screw on the 04 magura levers? i cant find it for the life of me where is it hiding. Posted this in small questions but no joy.

Try-all foam grips, There good.

That was me! But i made it myself it was just her fabric. And im not a kid infact im older than you. :P