Lawnmowerman Posted November 4, 2005 Report Share Posted November 4, 2005 At the moment I'm running a d521 in my leeson but I've just bought a new king which is built onto a sun doublewide B) So will i be able to use this rim without having to f**k around or will my frame take it? Its a leeson clear 660 XXL by the way :P Cheers :- Quote Link to comment Share on other sites More sharing options...
nafan Posted November 4, 2005 Report Share Posted November 4, 2005 It should be ok, never had the experience but maybe read about how wide the doublewide is compared to your D521, then do some measuring, if it doesn't fit, either do some sort of bodge (or get a thinner tyre) or be screwed.... :- Good luck anyways hope it all works out, nice new wheel btw B) :P Quote Link to comment Share on other sites More sharing options...
Mr Motivator Posted November 4, 2005 Report Share Posted November 4, 2005 Old Echo drilled rims fit and suit nicely. Sun rhyno lites also fit in pretty snug. Should just about get the doublewide in. Have you got 4 bolt or evo mounts? Quote Link to comment Share on other sites More sharing options...
quick_spider Posted November 4, 2005 Report Share Posted November 4, 2005 I ran a 38mm rim when I had it and the cylinders were spaced out quite wide. Clive built it to be able to run a 521 or a DX32 when he positioned the mounts. How wide is the doublewide? I'd guess you'd need to run worn down pads or move the mounts - Give Clive a call, I'm sure he'd move them out for you. Jon Quote Link to comment Share on other sites More sharing options...
Lawnmowerman Posted November 4, 2005 Author Report Share Posted November 4, 2005 Hehe! I cant be arsed sending it back to clive :) I think it's wider than a koxx rim so i think i might be f**ked (Y) 4bolt mounts btw Quote Link to comment Share on other sites More sharing options...
Brisa Posted November 4, 2005 Report Share Posted November 4, 2005 They're 45mm so just under a koxx rim. Measure between the pads and see if you have the clearence. Quote Link to comment Share on other sites More sharing options...
Lawnmowerman Posted November 4, 2005 Author Report Share Posted November 4, 2005 Cheers :) I'll give it a go in a bit (Y) Quote Link to comment Share on other sites More sharing options...
Onza Kieron Posted November 5, 2005 Report Share Posted November 5, 2005 They are 46mm actualy, my mate has just got one today, they are nice rims, and suprisingly light. Quote Link to comment Share on other sites More sharing options...
Ash-Kennard Posted November 5, 2005 Report Share Posted November 5, 2005 (edited) I phoned clive up last night to ask if i could fit a ronnie(38mm) in my leeson. He had never heard of an onza ronnie, so he just told me to move my pads out all the way and just measure the gap in beteen the pads. I measured and it will just about fit in mine. Are your mounts moved out more like some peoples are on request? if not tell me your results. Its a real coincidence that you have just asked this, lol Edited November 5, 2005 by ash-kennard Quote Link to comment Share on other sites More sharing options...
Lawnmowerman Posted November 6, 2005 Author Report Share Posted November 6, 2005 Thanks a lot for your help everyone :D I'll give it a go when I get the wheel and if it dosent fit the sun rim will be up forsale (Y) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.