Alex Dark

In what way are they shocking? Brilliant budget bikes, both of them....the rip rides extremely well considering just how cheap they are.

Mine's second hand and very well used on a pair of Echo CNC cranks and it works just dandy No complaints here....

Come out with the Plymouth lot sometime Jack

So so impressed with the Zoot! 1.45kg for the Blade and comp, eh? Thats amazing, no CNC'd BB yoke still? Mint, lovely geo ( although in my opinion could do with a tad more upsweep ) Makes for one hell of a product range. Onza have to be THE best all-round trials company out there I reckon...massive props to Joe on getting a product range that doesn't have 25.4mm bar clamps or steel stems in their line-up!

Used with bash plate?

Awesome, Cheers dude

Monty 221ti or Viz pro 720.

If not they're easy enough to make

Like on the old t-birds I'm sure the offset was more than ten mm? Edit: It would be 20 - 19" = 1" diameter...so 0.5" radius :. 12.25mm

I bet you measured from the outside of each hole, instead of the middle of the holes?

£120-170?

I doubt you'd get a whole lot for that dude, they're hardly the most desirable of frames I'm afraid.

haha fair play...id bleed my hope with water if it works, so keep us updated

my thoughts exactly... bike looks tidy, not your usual tgs wagon

Monty 219 X-hydra maybe?

Pciture please dude? sounds rather strange...they should all have been designed around the standard Magrua 4 bolt mount.

That does seem a bit of a bodge if I'm honest, i would have thought even normal cyclical tubing would be better than this?

QR would work fine....The axle is held so securely in the bolt through dropouts

Cheers Matt 1.5" is too big unfortunately Cheers though, and I called them yesterday

Has been done before....and it buggers the hell out of the Hope internals. As to that Micro-leaking , water is less viscous, so will tend to leak more surely?

Basically, I'm making a bike frame from scratch ( topic in Trials Chat ) and i got all my materials all sorted, ordered etc. Got an email last night saying the tubing I was planning to use for the chainstay/seatstays has been discontinued Ideally I need 1" x 3/4" 16swg 6082 and would be eternally grateful if someone could find a Uk supplier for this! This is completely last resort as I have no diea what to do if i cant get hold of it The nearest i can get is 3/4 x 3/4 or 1" x 1".....the only other viable alternative is ovalised, but this would be extremely hard and expensive to source Thanks in advance for ANY help on the matter

Chris King are *apparently* quite bad for trials though.....the wedge deforms in the top. ( From the mouth of Bigman ) MY tensile Ace and Echo CNC and Pi g headsets were great.....

Pretty much any FFW crank... Try-all, Echo CNC both seem very good cranks...I run the Echos with no complaints whatsoever

Mate of mine snapped around 3 of these Viz Rear mod axles, and we realised they were all dying on the threads...whether this is because the actual thread caused a big enough weak spot, or the compressive axle ends forced the axle apart slightly we're not sure....however; he used a non threaded axle that was the same dimensions, then filed out the axle ends to accept it. Trouble is I can't remember which one it is The T-master 07 fits the Viz hub directly, threads and all.... Can anyone tell me if the Trialtech / Rockman / or most likely the T-master 06 will fit the Viz..... I guess the only dimension that matters is that between the bearing flanges? Cheers, Alex

If the holes are too small then the only thing you can do is drill it I guess