l33th3tr33

.

It's a 128mm I believe. Trial tech race. Can you get spacers to go inbetween the hub and sprocket?

I've just swapped my frame and rear wheel for a because simple and profile hub. The chain line is way out. the BB is a trial tech race, try all cranks (160mm) and obviously profile rear hub with 12t sprocket. The chain pulls out at the BB end, I've taken the BB spacer out and the little washer in between the BB and crank, which makes it slightly better, but still not right. What do? Also the hub makes a kind of creak when putting any power into the pedals, is this chain line or a buggered hub? The hub has recently been serviced apparently.

Very nice! One thing though, are you not using a starnut and topcap? And what's the 140mm rotor like on the back?

leave a note telling delivery guy to leave with neighbor?

What you can't see is his split 'end'. Done at home with a razorblade. Have a look on the bizarre mag website for more on him.

And to top it all off Pauly's a hairdresser.

Which happens to me EVERY single day without fail.

Anyone?

That's an 8.0 if I'm not mistaken.

Can't see pics?

Silver?

Gonna be riding saturday, torquay, maybe paignton. Anyone up for it?

Thanks, how much you looking for? That's the only thing other than forks that I want to change That's how I got the wheel when I bought my first bike, so don't have a clue!

Decided to raw my frame, Black was pretty boring and couldn't decide on a colour.

Sorry, forgot to say the snail cams add up to 10mm. It's just that my rear hope doesn't bleed very well. I'll bleed it, push the pistons all the way out, cap back on and fit pads. then the lever just hits the bar, so I have to leave the pistons out so far so that it can get some bite.

I've got a lynx frame and monty hub, and have to use washers in between the caliper and frame to line it up, would I be better off spacing the hub out on the dropouts instead to get a better line up? EDIT: Fail. I'd have to put the snail cam on the outside of the dropout to remove the washers, would it stress the frame too much if I did want to do that?

Out in october-ish. Wait til next june for iphone 6, new look to it, and better specs when said new iphone 4 contract ends? And if it's an upgrade with another 12 months with the same provider then you should get an even better deal.

I'm going out tomorrow instead, weather is shite! Gonna go over paignton I think.

Sounds like the bleed, have a watch of this.....

I'll be out riding in tq tomorrow, if anyone else is then let me know before 12 and I'll come meet up

Where abouts do you ride in torquay?

I think that would look good in a graffiti or abstract kind of style, I'd definitely like to see the finished piece though!

Been learning tattooing for a while now, got a legpiece going on, I'll whack some pics up when I can get hold of a camera. Oh, and I'm down to my wrist now with my sleeve so I'll get some of that too.

Ahhh that sucks I messed my knee up getting back into trials after a 5 odd year break so that didn't help at all! I'll give you a shout if I can make it over sometime. Yeah I think the last time I saw you was at least 6 or more months ago.... When you get back to riding I'll see if I can get over for a ride