wally

Where do you live mate? I'm in Wisbech, not far from kings Lynn.

Yeah I will be out

Thanks, does he run a half link with that ratio? I'm struggling with the tyre hitting the bb with the same ratio.

Is Stan running 15t or 16t rear sprocket?

Ive just got one of these frames, im also running a 2.4 Rubber Queen, but with a gear ratio of 18:15 the top of the tyre tread is rubbing on the bb shell what ratio are you running? Dont really want to run a half link?

We have discussed selling a kit depends on the demand! Thanks Joe Yeah i've just started getting back out on the trials bike, just bought a new frame will be up for riding soon! Either come up here or I will take a trip down your way.

SnoBike V1 had its first test run at the weekend. Here a video of what we managed to catch on film! Im in the Blue coat and Arron Rodgers (Todge) is in grey. Enjoy.

Here's a video of our first test run of SnoBike V1. Worked really well and had an awesome day on it!

I run 18:15 on my echo control 09, like you say the wheel nearly sits out of the back of the dropouts and the magura cylinders are never hitting square to the rim because of the position of the wheel. I milled out my brake clamps so that they would drop further, its a little better. Quick question, are most people now running 18:16 on these sorts of frames? Is it work me trying a 16t sproket on the back?

Just checked and you are correct sir! Haha I know nothing about skis! We did think about it, like you say the natural position for a rider is one foot in front of the other, but we decided to keep it simple, plus the people who will be using it have varying feet forward styles.

Well...basically what happened its... Me and Arron (Todge on here) were bored one Friday night, we dreamt up this concept, did a quick sketch, then built it the following day! We thought we would be proactive and prepare for snowy conditions early this year. SnoBike is fitted with Solamon 'Big Air' snow blades, bungee tensioners and knurled stunt pegs for extra snow grip. We are quite pleased with our centre pegs which are completely home made, and bolted through where the BB used to be using the old BMX cups. The whole thing cost me around £35 in total, most of it consists of bits I had lying around in the shed. Im so chuffed with how the whole thing turned out! We aim to make a fleet, V2 it going to be a trials spec one, obvoiusly lighter and without stunt pegs

Here's my 2005 Zoo Python from a few years back. With home made disk adapter and rear Profile disk hub. Version 1 - Avid BB7 disk set up. Version 2 - Hope Mono Trial disk set.

Thanks Matt, you still riding? Has been a while since I saw you! We rode the quarry at the top of Pit Lane, and also had a look at another yard full of blocks a bit further down on the left, the rocks are even bigger in there! They are stacked higher than houses! Do you mean actually inside the quarry? Ive done a moto-trials comp in there, tis pretty sweet. You know of any more areas? On Google maps its Pit Lane, Ketton, PE9 3SZ, you can see most of the areas from Google street view, thats how i found it haha.

Haven't been riding a lot recently, but I found this pretty decent quarry close to where I live, so went for a little ride last weekend and here's a short video of it. Thanks to Arron Rodgers (Fresh Products) for filming. Trust me the rocks are bigger than they look haha! Let us know what you think.

Yeah man, nice video. I cant wait to get all this uni work out of the way and get some riding done again! You seen my video that Jack posted the other day?

Thanks yeah im deffo up for a ride, havent ridden properly since September because of uni and the weather!