Nick Garland

She does anything she's not worth it. Simple as. If she's honest and doesnt do anything then you know you can trust her in future.

Then when a solution is found can put it all back up for everyone if your feeling nice. I hope something is sorted, be nice if the biketrial companies took notice of Trials-Shack as half of their riders video's go on their because they pay for s*** servers that offer 4b/s and take 15 hours to download a 3 min video which is appauling. I think that someone will help the situation. Hope they do anyway. Is there no way TF and TS can like combine with some form of advertising. Or a subscription service like Neowin.net. Those who pay get access to a fast 100mbit line and those who dont get a slower line or something? Just an idea.

It converts a 74mm postmount from 160 to an IS disc mount at a 185 size. Which is what you wanted isnt it? EDIT: I see what you mean now. Yea flipping it over should work. I realyl need to real things fully. Might need abit of bodging. Otherwise I think you will need to run two adaptors.

I see what you mean now. :) 205 isnt overkil, its not enough :P You might be able to buy those Avid adaptors because in theory if you wanted to change your Avid disc size then you would have ot buy one. One of these is what you need. Turns a 160 into a 185.

Long be fine in 5"8 and on a 1090 :)

Woops just realised you put you have to pay to see lol. Lucky.

BB Tool Use a hammer and piece of wood for headset, or a vice, or go to a bikeshop. As someone said they are too much for how much we use them.

Only the mounting bracket that converts 74mm postmout to IS. So there is no actual difference between the calipers other than how far out they are due to mount.

Frames like 3/4 weeks old if its flared already then oh dear. I think greasing the forks and stem like Adam said seems to have worked.

Yea Adam I do have Urbans. Im feeling worried now. Ive checked the disc mount and cant see a crack. I'll go try greasing the steam idea now. Should I use heavy grease or a light lubricant?

They are Pazzaz ones and as far as Im aware they have small amounts of alu, at ends and the bulge area. I'll go grease that area. As for putting grease into a sealed bearing headset <_< no thanks. Its about a year old, might need a service but I doubt it. Unless you meant re-grease the bearings and not just slap it in. EDIT : Not a cracked stem forgot to mention checked that too.

Hi there. Hve a strage creeking coming from the front of my bike. At first thought it was Avid clicking. Then though forks snapped etc and its not. We cant work out what it is thats wrong. Ive eliminated: Cracked Forks (cant see anything taken them out and looked, no cracks visible on outside of steerer, could be under crown race but tats last resort) Not king headset thats fine Not avid clicking All bolts are done up tight. Basically when I push down on the bars it creaks at me. I have carbon fibre bars but I didnt they carbon creaked, eeek! Anyone got any ideas. I remember there was a post about noises before and to eliminate things one by one. Theres not a lot left to eliminate.

Hit the star nut down, cut the forks so they are 3-5mm below top of stem. Problem solved. Or as someone said above get it dont at a bike shop sounds like you have no idea what your doing. (I thought the idea of a "new members" section was to keep this members area free from posts like this?)

Sounds like a bearing problem if it gets stiffer as you turn it. Take off the circlip and remove the o-ring and have a look. Never heard of a Chris King Headset with bearing problems.

1 hour 10 odd left. Ill shack it tomorrow if no one else does first. Speedy 9.9kbs or 12kbs if Im lucky on a 2mb connection.

Found this over on OTN Exlpaains it basically. Good idea I think for those who dont want bb rise or anything. Edit : BT guy posted on there its an old BT 5.0

From experience the XTR lever is much better quality. I run one on my Avid and its lovely, really smooth, very comfy minimal design too. My friends SD7 is rattling lose and moves a good 1cm to 2cm up and down and about 0.5cm before it actually begins to pull the cable on his disc. I would get the XT/XTR (same except colour basically) as its a better quality than the SD7. The Ultimatemight be better but its too expensive.

Well I was helping my friend fix his bike and though "hmm this isnt the first time we have had to repair a split crossover for you" so we tried to fit the marzochi as a booster. It didnt work. So out came the tape measure, needed something 4" apart ish. Jokingly I said "we could cut this truvativ bash into a booster as the holes look the right distance." They were. He now has a Truvativ 22t bash as a booster on his bike I will get him to post some piccys later.

£200 at a guess. Its not exactly top spec so it wont go for loads. You will never get back what you put into your bike.

Hey I decided tonight to try and make an MSN skin, I've only been at it 4 hours just wanted some views on it. Ive only managed to get this far, cant seem to find files to edit the main msn window. Anyone got any ideas for it please say so. Thanks all comments welcome.

I think it might be like that guessing from the name Mono Mini, thus one piston at a guess, so one is closer and the other moves. Im not too sure though, I could well be wrong but thats my guess. So it might be normal. If not then you might have a "sticky piston" so if one doesnt retract the other will retract the amount the other didnt due to fluid levels.

13% chav for me, even though Im not a chav at all. Rather funny questions though.

Ah found it, their site is confusing. They need to do another english version. EDIT: And a faster server 4.8kb on a 2mb connection. This is silly.