weebryan

I have anti-freeze for 4 years now and still going strong only had 1 bleed never touched it again I used the following: 1 sink basin for kitchen cheap ass plastic one out of asda Anti freeze aquired from work ( any will do ) Syringe and bleed hose with barb Water remove brake and curl it up and cable tie it so it fits into basin, tpa all way out fill basin with hot/warm water dunk brake in and remove bleed screws work brake and bleed with syringe with water to remove oil/dirt remove tools and brake and syringe wash oil/water and start fresh clean basin fill basin with cold antifreeze (the colder the better get more in )and bleed brake with syring, but put bleed bolt in at slave loose to slightly pressurise and squeeze air out squeze syringe slowly tighten all screws under antifreeze remove brake and tools, poor antifreeze into contaniers for futer use NOTE: you can play about with completely removing lever and pin/tpa then bleed but be carefull you dont push the master piston out, i tried it worked really well but it shoved the pads in slightly when i put lever back on so i slackened bleed screw till they return and you have a small pressure in the lines so no lag and any antifreeze/air if trapped cant compression any more and work perfect for me never touched it since

Ha ha had a drive around and yes its very poo, oh well going to be a long week will keek searching though!!!

Down in davenrty for a weeks training course for work. Looking for some good natty or street, dont know the area too well so will search tonight Any places on google map?

Running slicks? interesting

Its for a hope xc before they were mono mini around 1999-2002 if i remember right well thats when i bought it

first thoughts really stiff, feels whippy light

My bike Rockman akali 8.5kg Wifes bike Yaabaa 949 10.2 kg Baby hannah TBC

bike building on friday night hopefully all goes to plan done for weekend

Big fan of try-all but i have opted for the trs and they work for me, more grip than the single vp, wider than the vp and lighter, also sealed bearings and the same as try-all so why pay double the amount for tryall name?

up for it if i can get the wee one watched

what 128? the chain rubs of the frame any thing longer than 120 Frame - DOB 20" Cranks- Try-all 165mm Rear hub Try-all disk Freewheel Try-all Sprocket Trialtech sport 12tooth with 2mm spacer Bash Trialtech Half ti ring (replaced orignial spacer from xtp) BB VP 68x118mm you can see pics in link below

in that case i would need a bb at either 119/120mm axle length any longer and the chain rubs the frame using 118 the now if i under tighten the crank with a short allen key its fine if i get a long allen key and a good tighten it rubs ever so slightly

he he like the wit my type of humor anyway tried those gusset ones and are too small oh well to the machine shop i go

i am looking for washers/spacers that fit over the isis axle to stop the the freewheel rubbing on to the bottom bracket around 22mm id

-7 no effect, antifreeze from work PGXL diesel engine coolant used this for the last 3 years in same brake PGXL Info

mmmm interesting will need to go here and catch up with you hopefully during the holidays, hopefully your brakes dont freeze like last year

If you need spacers go to b and q or local hardware store and buy Aluminium Round Tube for like £3 and saw to length and will also do brake booster spacers thats what what i done. b AND Q

CRC Industrial contact cleaner, dry in seconds, leaves no residue, multi purpose cleaner I use this in work (Fixing diesel engines) and the electrical plugs can get oil/dirt in them and this stuff cleans it like new and has no effect on plastic,rubber,metals. I also use it to put grips on aswell, at max 1 minute the grips are dry and solid to use and wont come loose and i clean all my bike parts PRODUCT INFORMATION Industrial QD Contact Cleaner Use in bench top cleaning applications requiring rapid turn-around time Removes light oils, dirt, dust, fingerprints Does not damage plastic Extremely flamable Self merchandising

Loved it , liked the smooth uci style you got going looking forward for more of the action

yea would like to know more too. Do you have a map or post code of were it is and i will scope it out and will tell others about it

I know the pros are using alternative trials shoes but what are they? I know kenny bealey rides addidas mali whats vince and gilles using and can you get them in this country? ps I am looking for light/thin and good ankle support shoe and not skate shoes and hopefully cheaper than ribos any ideas

Evolve Last year i through my video player(not wroking) and tapes so if anyone has any of the others ie revolution and also - down, double down and third down online post the links cheers!!!