Jump to content

The Virus


weebryan

Recommended Posts

Done this today and very pleased with it

423641_10150721178308092_515063091_11407874_1611686980_n.jpg

422460_10150721180378092_515063091_11407879_528098484_n.jpg

420671_10150721189493092_515063091_11407903_1398066227_n.jpg

431638_10150721422363092_515063091_11409085_408701317_n.jpg

Quick spec

Echo tr wheel set

Tnn brakes front lgm rear bee greens

Schwalbe tires F rocket ron R big betty

Echo cranks, trial tech ti bash, rockman freewheel, tr pedals

Monty ti stem and try-all bars

Had a quick shot and freewheel bound up on spacer, so put old one i had back on and all is good, the chain tension is pretty tight even though the screws are backed right out so hopefully slacken as chain streches and the pads did even need bedding in. Just to cut the steer once i am happy with set up and my little angled spacer works a treat

  • Like 1
Link to comment
Share on other sites

whats with the stem stackers? surely your gonna hit your knee or chest or something on that??

Its just temporary until i get the height nice play around with the spacers

My last set of forks I fitted the stem on top of the headset and then cut the steer with no spacers then i bought another frame which was 20mm higher bb than previous frame and stem was too low and couldnt add spacers and also the other stems had too high a steer clamp than the monty stem so forks were fooked

Defo not getting it wrong this time

The stem is 145x25 and 20mm spacers feels nice and im 5"4 so for you i would go with 165x35 and mabey trial tech high rise bars , I know this is what duncan shaw rides and that was nice too just a tad too high for me

Edited by weebryan
Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...