Muel

I must admit, I'd be tempted by and Ozonys XR26, but other than that I can't see it happening. If I managed to someone eat all the paint from a lead coated from an Ozonys, would I die?

How bad is lead based paint? It's not like I'm going to eat it.

I've never heard of that being a problem? I've got a rubber queen and it's been amazing so far. I run it at like 35psi though so it's hardly soft.

About £23.50 I think. Will they be available from tarty?

Not really, I just lost count trying to work out how many cracks you managed to put into your last 2 frames.

Looks like you've settled in well Matt, you look smoother on stock. Try not to destroy this frame aye?

Wind the TPA all the way out and set the slaves up again, it should force the pistons to retract all the way.

No T16 no care. Is it a 1.6 or a 1.9?

It's against the rules, New Members arn't allowed to buy or sell to stop people singing up and scamming people straight away, that's what the validation system is for. It says in the rules not to post topics like this either, otherwise you won't get validated.

I've never heard anything about them being used on the rear, but going off how well my brothers bites and holds on the front, it should be pretty good.

Yeh, Monty forks, hubs and cranks are so much better than try-all/koxx..... I'd have an Ozonys XR26, Echo SL forks, Try-All H hubs on Trialtech rims, Try-All cranks, and trialtech bars on a Monty TI stem.

Just pump them up to around 30Psi then let them down until they're right for you, it's different for everyone and depends on your weight.

?

What is this topic about? Has one been deleted or something?

All mine are lower than they should be, not one over 30 degrees. It is idleing though I suppose.

http://dvdvideosoft.com/ I've got about 3 converters from that website, they all work amazingly, and no silly watermarks. They're also incredibly simple to use, just set your settings, add all the videos you want to convert into the list, click go and wait until it's done.

It depends what the graphics card is, the tend to have much higher working temperatures than CPUs, but Speedfan seems to think niether should go over about 35-40 degrees. 2 of you fans are only at 50% though, you could try putting them both up so it can cope better when it's under load?

Mine is incredibly tight with a rear mono trial, the holes have had to be filed oval to actually fit the caliper in the frame, and thats a standard rear caliper with a 180 rotor. Unless the BB7 is an incredibly small caliper, you could't get a 200mm rotor in, unless the post mount adapter thingy moves further up towards the bb with each size you go up, instead of coming straight out like the hope ones. Your best bet is just to ring up Tarty, they'll normally try it out for you with stuff like this, but from this photo below, the caliper is much taller than my mono trial, but in the pic it would have an adapter that's 1 size too big. EDIT: You're all too quick for me! Try a louise, my brothers is fantastic, it has more bite and hold than any Hope I've had, but the lever feel is really stiff and there is hardly any modulation at all.

It looks super nice, but 9.3kg? Wheres all that weight hiding? As far as I can see the only heavy part is the rear tyre, and that would only bring it down to 9.0-9.1.

I've got a 13t on the back with 16t on the front, it feels almost identical to my Echo, but the cranks are 12mm longer so it balances out the slightly higher ratio. I did have 16:14 but I couldn't get any speed for taps and couldn't gap properly.

I was about to say that! My Montys chipped and scratched really easily around the stem and brake levers, whereas the trialtechs still look as good as the day I bought them. I put a really big scratch in mine though, but it had wood/dirt in there, so I used some paint thinners and it came up a treat. (Paint thinners doesn't damage powder coated paint, I did my whole Scott YZ0 frame once, came up like new!)

16:13 on the stock with 170mm crank arms. 18:12 on the mod with 158mm crank arms.

Why not just make it so the mods can make people SMs?

I have been using WD40 in mine for the past year or so, it never skips and it's 2 years old.

Some of the new Try-All carbon bars, some of the new Try-All rims, and Ozonys XR26 frame, some Echo SL forks and headset, and a bike that doesn't keep breaking all the time.