Revolver

Haha, good post. If onza put a little bit of work in producing a better fork, that would be good. A pro series fork as well would be great, maybe market it under tensile?

You managed to get away then?

No.

Geometry (with Echo Urban fork, sold separately) Wheelbase: 1040mm Chainstay Length: 385mm BB Rise: 35mm (approximately equivalent to 10mm rise on a 26" bike) Head Angle: 73 degrees Reach from centre of BB shell to centre top of head tube: 650mm (25.5") I would be tempted to go for 375 CS and 40 or 45 BB, but if you're looking for an inspired copy, leave it. It turns out a higher BB is actually good for spinning moves, and it's good for trials so maybe you'd want to raise it a bit? Totally your choice! That's the good thing about marino. I'd buy a marino if he did them in alu

The majority of the order form is straignt forwards. You need to remember to click euro BB type if you're wanting to use an ISIS or square taper BB. You might want to use 135mm and horizontal dropouts. The only area of the geo that confuses me is the SA, seat angle. I know what it is, but not so much what difference it makes. You may as well set the tyre clearance to 2.7, for more choice of tyres, and the extra room if you buckle the wheels. Anything else I can help with?

You should've put where's my monkey in instead of no 15.

But then that's a big pleasure and not a little pleasure. When I get a decent 2-3 shift out of a corner, my mind drifts from the fact that the roof still drips water on my head/cock despite the fact the sunroof is now fully sealed shut.

You are both wrong! You want to be going faster, not slower! A good 2nd to 3rd out of a corner is win.

Echo pure 04?

To drop off, position your back wheel at the edge of the drop, lower the front end off the drop until it's around level, and then let go of the back brake and roll off, landing to two wheels. Lowering the front wheel sort of lowers the drop. Everything's got to go further if you don't do it.

A good shift between 2nd gear and 3rd

Looks wise it looks too low. Geo wise, I don't care, I'm not riding mod any more! My opinion on it is this - the limey hydroformed tubes look great, so this should, and geometry-wise, if it suits CLS then it can't exactly be shite, especially considering his last frame wasn't exactly shite, lol.

Cool, on your advice I've ordered a black 'un and a grey 'un in medium. Looking forwards to not being ice cold, like today.

Options, top right. Click standard.

SICK! I'm going

In actual fact it makes sidehops to that side more nobody is really bothered

What geo is your adamant? Is it a stock or modstock?

Heh, well, if it doesn't I'm changing to stock, probably next year.

I much like the idea of using 2 wheels where possible, and only relying on backwheel moves when you must, really. Something like that. Using 2 wheels more definately saves energy

Yep.

You CAN just change the hubshell, but the freehub body is different.

The short echo pure looks nice. I'd like to have a go on one Maybe you can sway me.

Give us an example?

NONSENSE! If TGS 24" frames are a waste of money, then what do you ride if stocks are too big and mods are too small?

The T-rex is in fact based on the coustellier frame.