James Quigley

just went out for an hour and anhialated myself (not injured just exhausted). oh well I might have recooped by the morning, just enough to ride well tomorrow.

.....or the prices of tubes will just go up a bit.

I might have been a bit more impressed if he'd have done it slowly. Looks 100x more hardcore if you do it slow.

just a hobby knife. they're not that hard to cut through really, any old stanley knife will do. The thinner the blade the easier and more pretty (not that you'll see that bit) I should have taken a pic of the material after I cut it to show you, but they're on my bike now. Oh well, next time perhaps

I'm bored and have just put some new material in so here you go No glue, cut off the little bits to make it fit the backing put it in place (nice and snug) and clamped in a vice to get them all the way in and level.

weathers now saying light showers, but sod it.....I cant wait, should be awesome

The thread mentioned above was mine and unfortunately I've got rid of the pics. But I'm still using that setup and it is awesome. I put the koxx bloxx in the oven at 190 for about 5 mins and they just popped right out. I dont use any glue to hold them in, just got to do some slight modification with a sharp blade and you're away.

Are you tempted to put a buket under the seat and piss through the hole for the harness? Would save you ever having to leave that room

I work in the cinema. Without a doubt the most relaxed job I've ever had. Wages are pretty crap (minimum) but with a work ethic to suit (minimum), also free entry to movies

liked that vid a lot. James is a great rider with a great name.

I'm pretty sure you'll have to fill out a form at the end of he tax year to get a tax refund. Takes ages for it to come through though as the government really dont want you to have it back

I'll 3D model Smo's design. all I'll say is it's not bike related but makes numbers 2's easier.

Do I tell Tank that I think he (Codie) loks like Del Boy? .....I think I just did. (only in one of those pictures above though)

I've had mine for 2 years and they are still as solid as when I bought them. Tank has had his over a year with holes drilled in them and they are still solid. With out a doubt the most bestest cranks ever produced.

It's that time of year again...... Starting to like this girl, pretty sure she likes me (we've been flirting like crazy today, and people have told me she does, but that dont mean crap) Problem is, it's that time of year where I let my standards drop and I dont actually know if she really is a nice girl, or if my minds playing with me and a few months down the line I'll be arggggh. I'll sneak a pic on my phone tomorrow and I'm sure smo or phil will tell me their 2 cents.

Got a project hand in the next day, so I guess I'll bring it along with me to the ride, sleep on the beach and hand it in the following day, perfect.

Love the monkey. Any places you'd recommend for dual moniter wallpapers?

Good point, it will heat the rotor and maybe the pads, but to transfer the heat through the pad and piston into the fluid would take some doing I'd of thought. Especially since they do cool quite rapidly too.

It is possible. Local rider here has a louise lever, mono trial caliper and a water bleed. Seems to work, although long term i.e. more than a couple of rides it will probably bugger up the brake.

Song made me want to die Ridding made me want to cry.

I'm guessing you'll know if the seals are broken as fluid will be leaking from the brake, around the seal area.

really? well it looks like I'll get that then.

Well I've already got the old vga cable for my xbox so that's not a problem. I looked at the Samsung, which has mixed reviews, including some negative comments on the main board it uses, which I'd consider a major one. I've found an LG one similar in spec to the samsung, with DVI-D and VGA so that would cover both my PC and Xbox plus it is HDCP compliant which means that I can watch blu-ray and other such stuff apparently (obviously not in HD, I'm not that much of an idiot). I guess I'll just buy one and be happy with it (after all my current 19" was a bargain buy and it's served me well for a couple o years now)

If you dont mind me asking, what monitor do you have. I'm looking for a decent 22" around the £200 mark that will take my pc and xbox360. Problem I'm having is that everysingle monitor I've found has really good reviews and really shit ones, which is a mind rape.

never thought that cranks clearing the downtube would be an issue, but they seem to have made it one.